Manual Casals CRH10REAK (page 6 of 48) (English, German, French, Italian, Polish, Portuguese, Spanish)

799657

Zoom out

Zoom in

1/48

Screwing, drilling/unscrewing:

- To drill or screw, ALWAYS have the direction set to

clockwise (CW).

- To unscrew, set the direction to counter clockwise

(CCW).

- The appliance should not be in use when changing

the screwing direction.

Electronic speed control (Fig. 1):

- The speed of the appliance can be regulated by

using the speed regulator control (I). This function

is very useful, as it makes it possible to adapt the

speed of the appliance to the type of work that

needs to be done.

- The speed of the appliance can be regulated

according to the pressure exerted on the on/off

switch (H). This function is very useful, as it makes

it possible to adapt the speed of the appliance to

the type of work that needs to be done.

- If the appliance works continuously at low speed,

working life of the appliance will be reduced

considerably.

Use:

- Connect the appliance to the mains.

- Select the appliance function desired. (C)

- Select the desired speed. (I)

- Place the appliance against the surface you want

to work.

- Press the appliance until the lengthways play is

taken up.

- Turn the appliance on, by using the on/off

button (H).

Note: Exerting high pressure does not increase

machine effectiveness!

WARNING: When the bit begins to penetrate concrete

or comes up against the reinforcement rods in the

concrete, the tool may react dangerously. Make sure

you keep your balance by distributing your weight

evenly and keeping your feet in a safe position

whilst holding the tool firmly in both hands to avoid

dangerous reactions.

damaged, it must be replaced and you should

proceed as you would in the case of damage.

Specifications:

CRH10REA / CRH10REAK

- Rated power (W): 400

- Rated Voltage: 220-240V~

- No load speed (rpm): 0-1500

- Blows per minute (ipm) 0-3600

- Maximum capacity in concrete (mm): 10

- Maximum capacity in steel (mm): 13

- Maximum capacity in wood (mm): 20

- Reversible / Electronic yes

- Weight (Kg:) 1,7

- Acoustic pressure level (dB(A)) < 90,5

- Vibration (m/s2) < 11

- Not suitable for use in presence of flammable

anaesthetic mixture with air or with Oxygen or

nitrous oxide

NB: These specifications are subject to change

without notice of purpose of improvement.

For EU product versions and/or in case that it is

requested in your country:

Ecology and recyclability of the product

- The materials of which the packaging of this

appliance consists are included in a collection,

classification and recycling system. Should you

wish to dispose of them, use the appropriate public

recycling bins for each type of material.

- The product does not contain concentrations of

substances that could be considered harmful to the

environment.

- This appliance contains, or could contain,

oil. Remember that one should abide by the

regulations concerning the elimination of this type

of contaminant.

Locking button:

- To activate this function press button (J) while

holding down the run button (H).

- To deactivate this function press the run (H)

button right down.

Once you have finished using the

appliance:

- Stop the appliance by releasing the on/off switch.

Cleaning

- Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

- Clean the electrical equipment and the mains

connection with a damp cloth and dry. DO NOT

IMMERSE IN WATER OR ANY OTHER LIQUID.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products, for

cleaning the appliance.

- Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

- Never submerge the appliance in water or any

other liquid or place it under running water.

- If the appliance is not in good condition

of cleanliness, its surface may degrade and

inexorably affect the duration of the appliance’s

useful life and could become unsafe to use.

Supplies

- Always use original supplies, designed

specifically for your appliance model.

- These supplies are available in specialist

shops.

Anomalies and repair

- Take the appliance to an authorised technical

support service if a product damage or other

problems arise. Do not try to dismantle or repair

without assistance, as this may be dangerous.

- If the connection to the mains has been

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals CRH10REAK in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals CRH10REAK Manual

Product: