Manual Casals CPLI18K2 (page 8 of 84) (English, German, French, Italian, Portuguese, Spanish)

727569

Zoom out

Zoom in

1/84

and allow it to cool before undertaking any

cleaning task.

- Clean the electrical equipment and the

mains connection with a damp cloth and dry.

DO NOT IMMERSE IN WATER OR ANY

OTHER LIQUID.

- Clean the equipment with a damp cloth with

a few drops of washing-up liquid and then

dry.

- Do not use solvents, or products with an

acid or base pH such as bleach, or abrasive

products, for cleaning the appliance.

- Do not let water or any other liquid get into

the air vents to avoid damage to the inner

parts of the appliance.

- Never submerge the appliance in water

or any other liquid or place it under running

water.

- If the appliance is not in good condition

of cleanliness, its surface may degrade

and inexorably affect the duration of the

- Before using this product for the rst time, it

is important to make a full charge of batteries.

Inserting a bit:

- To open the drill’s chuck (1), whilst

completely switched off, take rm hold of the

back part of the chuck and turn the front part

of the chuck counter clockwise.

- Insert the drill bit, screwdriver bit, or other

tool/ accessory required for the task, into the

chuck. In order to obtain a secure fastening

of the bit, insert the bit as far as you can into

the chuck. Take rm hold of the back part of

the chuck and turn the front part of the chuck

clockwise until it is rmly closed.

- In order to remove accessories from the

chuck, follow the same steps as indicated

previously but in reverse order

Screwing, drilling/unscrewing:

- To drill or screw, ALWAYS have the direction

set to clockwise (CW).

- To unscrew, set the direction to counter

clockwise (CCW).

- The appliance should not be in use when

changing the screwing direction.

How to select the direction of the rotation

(Fig A)

- Do not change the direction of the rotation

whilst the tool motor is in operation.

- The appliance has a selector (6), which

allows the direction of rotation to be changed.

Electronic speed control: (Fig A)

- The speed of the appliance can be

regulated according to the pressure exerted

on the on/off switch (7). This function is very

useful, as it makes it possible to adapt the

speed of the appliance to the type of work

that needs to be done.

- If the appliance works continuously at low

speed, working life of the appliance will be

reduced considerably.

Mechanical Speed change (Fig C)

1st speed: Move backwards the selector (12)

2ond speed: Move forwards the selector (12)

- The appliance should not be in use when

changing the speed

Select the function (Fig A, C)

Driving

- Turn the selector (10) until the arrow on the

appliance points to ( ).

- Turn the selector (2) from (1) to (16) until the

desired result is obtained.

Drilling

- Turn the selector (10) until the arrow on the

appliance points to ( ).

Drilling with Impact Function

- Turn the selector (10) until the arrow on the

appliance points to ( ).

Use:

- Select the appliance function desired. (2)

- Turn the appliance on, by using the on/off

button (7)

Once you have nished using the appliance:

- Stop the appliance by releasing the on/off

switch.

- Remove the battery from the appliance if you

are not intending to use the appliance during an

extended period.

- Clean the appliance.

Cleaning

- Disconnect the appliance from the mains

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals CPLI18K2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals CPLI18K2 Manual

Product: