727568
9
Zoom out
Zoom in
Previous page
1/84
Next page
9
and allow it to cool before undertaking any
cleaning task.
- Clean the electrical equipment and the
mains connection with a damp cloth and dry.
DO NOT IMMERSE IN WATER OR ANY
OTHER LIQUID.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then
dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not let water or any other liquid get into
the air vents to avoid damage to the inner
parts of the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade
and inexorably affect the duration of the
appliance’s useful life and could become
unsafe to use.
Supplies
- Always use original supplies, designed
specically for your appliance model.
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if product is damaged or
other problems arise. Do not attempt to
disassemble or repair the appliance yourself
as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced, take the
appliance to an authorised technical support
service. Do not attempt to disassemble or
repair the appliance by yourself in order to
avoid a hazard.
- If the appliance works continuously at low
speed, working life of the appliance will be
reduced considerably.
Mechanical Speed change (Fig C)
1st speed: Move backwards the selector (12)
2ond speed: Move forwards the selector (12)
- The appliance should not be in use when
changing the speed
Select the function (Fig A, C)
Driving
- Turn the selector (10) until the arrow on the
appliance points to ( ).
- Turn the selector (2) from (1) to (16) until the
desired result is obtained.
Drilling
- Turn the selector (10) until the arrow on the
appliance points to ( ).
Drilling with Impact Function
- Turn the selector (10) until the arrow on the
appliance points to ( ).
Use:
- Select the appliance function desired. (2)
- Turn the appliance on, by using the on/off
button (7)
Once you have nished using the appliance:
- Stop the appliance by releasing the on/off
switch.
- Remove the battery from the appliance if you
are not intending to use the appliance during an
extended period.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains
Specifications: CPLI14K2 CPLI18K2
- Rated Voltage (V): 14.4 18
- Battery capacity (A·h): 1.5 3.0
- No load speed (rpm): 0-350/0-1250 0-350/0-1250
- Max drilling torque (N.m): 35 40
- Maximum capacity in steel (mm): 13 13
- Maximum capacity in wood (mm): 3 
- Maximum capacity in masonry (mm): 13 13
- Drill chuck capacity (mm): -13 -13
- Keyless Chuck Yes Yes
- No. of torque settings 16+1+1 16+1+1
- Reversible / Electronic yes yes
- Charging time (hours): 1 1
- Weight (Kg:) 1,7 1.9
- Sound Pressure level (LpA) = 83,5 dB(A), KpA = 3dB 83,5 dB(A), KpA = 3dB
- Sound Power level (LwA) = 84,5 dB(A), KWA = 3dB 94,5 dB(A), KWA = 3dB
- Vibration 7,528 m/s2, K=1,5 m/s2 7,528 m/s2, K=1,5 m/s2
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casals CPLI14K2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casals CPLI14K2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info