727567
8
Zoom out
Zoom in
Previous page
1/74
Next page
8
Electronic speed control: (Fig A)
- The speed of the appliance can be regulated
according to the pressure exerted on the on/
off switch (7). This function is very useful, as
it makes it possible to adapt the speed of the
appliance to the type of work that needs to be
done.
- If the appliance works continuously at low
speed, working life of the appliance will be re-
duced considerably.
Mechanical Speed change (Fig C)
1st speed: Move backwards the selector (12)
2ond speed: Move forwards the selector (12)
- The appliance should not be in use when
changing the speed
Select the function (Fig A, C)
Driving
- Turn the selector (10) until the arrow on the
appliance points to
( ).
- Turn the selector (2) from (1) to (16) until the
desired result is obtained.
Drilling
- Turn the selector (10) until the arrow on the
appliance points to
( ).
Drilling with Impact Function
- Turn the selector (10) until the arrow on the
appliance points to
( ).
Use:
- Select the appliance function desired. (2)
- Turn the appliance on, by using the on/off but-
ton (7)
Once you have nished using the appliance:
- Stop the appliance by releasing the on/off
switch.
- Remove the battery from the appliance if you
are not intending to use the appliance during an
extended period.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any clean-
ing task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or
any other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and in-
exorably affect the duration of the appliance’s
useful life and could become unsafe to use.
Supplies
- Always use original supplies, designed spe-

- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if a product damage or other
problems arise. Do not try to dismantle or
repair without assistance, as this may be
dangerous.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casals CPBLI20K2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casals CPBLI20K2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info