612127

Carucci Miyota 8217 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Adjusting the strap with buckleWatertightness to DIN 8310Watch care and precautionsWarranty
Open the buckle and pull the strap (in the
direction of the arrow shown) until the ad-
justment pin appears.
When the position is correct for your wrist,
place the adjustment pin in the desired hole.
Pull the adjustment pin into the buckle (by
pulling the strap in the direction of the ar-
row shown) until pin clicks into place
Slide extra strap through the loop keeper
before snapping the clasp together.
We guarantee the watch described on the enclosed certifi cate for two
years. The guarantee is valid from the date of purchase, provided that
your watch was sold by an authorized dealer and that the certifi cate of
guarantee was completed properly. This guarantee covers all defects
due to defective materials or manufacturing. During this period,
regulations, adjustments, repairs or the replacement of parts or the
movement will be carried out free of charge, except when the damage
has been caused by accidents or as a result of the intervention of un-
authorized persons. This guarantee does not cover the leather strap,
the glass or battery of normal wear. In the event of a claim under the
guarantee, send the watch together with a valid guarantee certifi cate,
to the authorized dealer from whom the watch was purchased.
model #:
date of
purchase :
stamp:
Instructions
Calibre Miyota 8217
www.carucci.de carucci.watches
www.carucci.de carucci.watches
•
The exactness of a (mechanical) automatic watch is naturally not
comparable with a quartz watch. Low divergences (+/- 30 sec./
day), are normally just with differences in temperature. To ob-
tain these low divergences, you must completely winding the
watch by hand before you wearing it!
•
Push buttons only easily and slowly. Importantly no strong and
quick pushes!
•
No calendar settings between 18:00 and 6:00 o‘clock, to avoid
damages of the calendar mechanism! At non-observance it can
lead to gearwheel break or similar damages.
•
Some watches have screwed up crowns which have to be released
anticlockwise.
•
The buttons and crowns of XXL watches are screwed up by caps
which have to be unscrewed anticlockwise.
•
Avoid strong percussions (e.g. drop down or bang).
•
Avoid strong electric fi elds or static electricity which could harm
your watch machanics.
•
Keep your watch clean. Use a damp and soft cloth for cleaning
your watch. Never dive your watch under water.
•
We recommend having your watch checked once every year to ensure
long use and trouble free operation.
Please, note that the information of the watertightness counts to the new
state of the watch and is to DIN 8310 no remaining quality, because the
built-in sealing elements decrease in their function and in the everyday
use. Therefore, you avoid in general contact with water. It should be che-
cked yearly and in particular before special strains.
•
Weak spots with waterproofed watches are a watch glass, crown, case
back or even construction of the case.
•
Avoid using soap or other chemicals wich could damage thick elements
of your watch.
•
Don’t push buttons if the watch is wet.
•
The crown should be always put on the normal position in the water.
The screwed crown should be drawn.
•
Please, note that for a short time high air compression can originate
from a impetuous swimming moving or jumping in the water.
•
Should water or condensation appear in the watch face, have the watch
checked immediate. The water can lead to corrosion of the components.
indication Instructions
Washing, Rain
Showering bathing Swimming
free diving without
equipment
no indication
no no no no no
3 ATM
yes no no no no
5 ATM
yes no yes no no
10 ATM
yes yes yes yes no
20 ATM
yes yes yes yes yes
Calibre Miyota 8217
Automatic winding watch can also be hand winded by turning the
crown in normal position. Wind 15-20 times and it will start to move
naturally after shaking slightly.
Setting the time:
1. Pull the crown out to the 2rd position
.
2. Turn the crown to set hour and minute hands.
3. Push the crown back to the normal position.
Setting the date:
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date (*If the date is set
between the hours of around 9:00 PM and 1:00 AM, the date
may not change on the following day.
3. Push the crown back to the normal position.
hour hand
1.
2.
minute hand
second indicator
Carucci
date indicator
Stundenzeiger
1.
2.
Minutenzeiger
Sekundenzeiger
Carucci
Datumsanzeige
24 Stunden-
anzeige
24 hours
indicator
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carucci Miyota 8217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carucci Miyota 8217 in the language / languages: English, German as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info