722436
34
Zoom out
Zoom in
Previous page
1/54
Next page
34
Einstellen der Rutschkupplung
Sie können die Rutschkupplung einstellen, indem Sie zur Verrin-
gerung des Schlupfes die Einstellmutter im Uhrzeigersinn (nach
rechts) drehen und umgekehrt.
Bei richtiger Einstellung darf sich das Hauptzahnrad fast nicht mit
dem Daumen nach vorn drehen lassen, solange Sie die Räder fest-
halten. Um dies beim Fahren zu pfen, schalten Sie das fahrfertige
Fahrzeug ein und stellen Sie ihn auf den Boden. Schubsen Sie ihn
etwas rückwärts an und geben dann noch im Rückwärtsrollen
Vollgas vorwärts. Die Kupplung darf dabei nicht mehr als 2 - 3 cm
weit durchrutschen, während das Modell beschleunigt.
Slipper-clutch adjustments
Adjustments are made adjusting the slipper nut clockwise (to the
right) to reduce the slip or counterclockwise (to the left) to increase
the slip.
When adjusted properly, you should be able to hold the tires
firmly and barely be able to push the spur gear forward with your
thumb. To track test, switch the modelcar on and place it on the
ground. As you push it backwards, allowing it to roll freely, punch
the throttle. The slipper should slip no more than an inch or two as
it accelerates.
3. RUTSCHKUPPLUNG • SLIPPER CLUTCH
Hier eine Anleitung zur Rutschkupplung, die sowohl zur Antriebs-
steuerung als auch zum Schutz des Getriebes dient. In erster
Linie dient sie dazu, ptzliche starke Stöße auf die Antriebswelle
abzufangen, wie sie bei weiten Sprüngen oder hartem Gelände
auftreten. Zudem läßt sich mit ihrer Hilfe die Motorkraft auf die
Räder einstellen, um das Durchdrehen der Räder auf rutschigem
Untergrund zu begrenzen.
Here is the manual for the slipper-clutch device that offers both
traction control and protection for the transmission. The slipper is
primarily used to help absorb sudden impacts on the drivetrain due
to landing big jumps or driving in hard terrain. Additionally, it can
be used to smooth out the flow of power to the wheels and limit
wheel spin when running on extremely slick surfaces.
500405574
Kupplung
vorspannen
Pre-load
clutch
Lockern
Release
500404170-03
500405570
500405570
500404170-03
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carson X10 Ninja at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carson X10 Ninja in the language / languages: English, German, Dutch, Français, Italian, Espanõl as an attachment in your email.

The manual is 25,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info