722380

Carson Reflex Wheel X2 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
H
I
Einstellung Failsafe / Fail Safe function setting
Verbindung von Sender und Empfänger / Binding the transmitter and receiver
G
Bedienung des Senders / Transmitter Handling
Gashebel / Throttle trigger Lenkrad / Steering wheel
Vorwärts/beschleunigen /
Forward/Speed up
Bremse/langsamer /
Brake/Speed down
Links /
Left
Rechts /
Right
Neutral
Neutral
BETRIEBSABLAUF / OPERATING PROCEDURE
• Vor dem Betrieb: Erst den Sender einschalten, dann den
Empfänger. Als letztes den Fahrakku mit dem Regler
verbinden. / Before operation: Connect the drive battery
to the control unit. First turn on the transmitter, then the
receiver.
• Nach dem Betrieb: Den Akku vom Regler trennen. Den
Empfänger ausschalten, dann den Sender ausschalten. /
After operation: Disconnect the battery from the control unit.
Turn the receiver off, and then the transmitter.
• Vergewissern Sie sich, vor und nach Inbetriebnahme
des Senders, dass alle Trimmungen in der gewünschten
Stellung stehen und alle Kontrollen vorgenommen worden
sind. / Before and after operating the transmitter, make sure
that trim is in the desired place and that all checks have been
made.
1. Der Gashebel und Lenkrad müssen auf Neutral stehen. / Set the TH,
ST switches to the normal position.
2. Schalten Sie den Sender und anschliessend den Empfänger ein. /
Turn on the transmitter and receiver.
3. Drücken Sie den „F/S SET“ Knopf am Empfänger, die LED beginnt zu
blinken. / Press the F/S SET button, the LED on the receiver should start
flashing rapidly.
4. Bringen Sie den Gashebel in die Bremsposition. Die LED leuchtet
nun dauerhaft. / Put the throttle trigger at the brake position, the LED
should become solid.
5. Bei Elektrofahrzeuge muss der Gashebel bei der Failsafe-Einstel-
lung in die gewünschte Stop-Position gebracht werden. / For
electric model, put the throttle trigger at the stop position when you
are making the setting.
Sobald das Empfangs-/Sendesignal unterbrochen ist, schaltet der
Empfänger in die voreingestellte Gas-Failsafe-Stellung. / As soon as
the receiver/transmitter signal is interrupted, the receiver switches to the
default throttle failsafe setting.
Schalten Sie den Empfänger ein. Drücken Sie den „SW“ Knopf,
die LED beginnt zu blinken. / Turn on the receiver power. Press
the SW switch. The receiver‘s LED should start flashing.
Wenn die LED am Empfänger dauerhaft leuchtet ist der Verbindungs-
vorgang abgeschlossen. Das RC-System ist einsatzbereit. / When the
LED on the receiver becomes solid, the binding process is completed.
Schalten Sie den
Sender ein. / Turn on
the transmitter.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carson Reflex Wheel X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Wheel X2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info