Manual Carson Reflex Wheel Ultimate Touch (page 61 of 96) (English, German)

722405

Zoom out

Zoom in

1/96

CARSON Reflex Wheel Ultimate Touch 500500516

Receiver connections explained

Binding

CH1-CH4: Connection to the relevant channel

(servo/ESC, etc.)

BIND, VCC: Connection for binding connector and

power supply.

OUT: ASbus connection for outgoing PPMS

data signals and for connecting the

serial bus module to extend the

channels further.

IN: Connection for all types of sensors.

The receiver supplied is already bound to the

transmitter. If you would like to bind a new

receiver to the system, please proceed as follows:

1. Install the battery in the transmitter and switch

on the remote control.

2. Open the main menu and select the “RX Set-up”

function on the second menu page and then

press “Bind with a receiver” to start the binding

procedure.

3. Insert the binding cable into the RX connection

“B/VCC”.

4. Connect a 6V battery to any channel from CH1 to

CH4. Ensure correct polarity. The receiver LED will

start to flash.

5. The transmitter will end the bind mode automa-

tically once the receiver has been successfully

connected to the transmitter.

6. Unplug the binding cable and reconnect the

receiver to the battery. Please connect the servos

and sensors to the receiver and check all the

functions.

7. If the functions should fail to work properly,

you will need to repeat the above steps again.

Binding connector

Receiver

RX battery

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Wheel Ultimate Touch in the language / languages: English, German as an attachment in your email.

The manual is 6,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carson Reflex Wheel Ultimate Touch Manual

Product: