722408
72
Zoom out
Zoom in
Previous page
1/86
Next page
GB // 72
Audible alarm
1. When the transmitter battery is low and the voltage is lower
than 3.75V, the system will make alarm which sounds slowly.
2. If the voltage is lower than setting data due to low battery of
receiver, the system will make a sound „Ba, Ba“.
3. When the error rate is more than 60%, the system will make a
sound „Du, Du.
4. When the timer goes off, the system will make a sound “Bi, Bi, Bi,
Bi’” thrice.
5. Before the transmitter is turned off automatically, the system
will make a sound „Du Du Du.
6. When the transmitter’s battery voltage is lower than 3.7 V,
the system will make alarm which sounds quickly. When the
voltage is lower than 3.65 V, the transmitter will be turned off
automatically.
1. Transmitter does not start up.
The battery is not properly installed.
Battery is empty.
The screen flashes when the transmitter is powered on, and
then the transmitter turn itself off immediately. It indicates the
electric quantity cat support system for a long time and the
transmitter will be turned off once it is powered on.
The battery shrapnel is oxidized and loose contact.
2. Remote control distance is not enough.
The wrong position of transmitter antenna or receive antenna.
Nearby radio interference.
Battery is empty.
Obstacle screens off part of the signal.
3. The transmitter can´t control the receiver.
The transmitter or receiver enters into the bound status by
accident. The problem can be solved by powering on again or
binding again if necessary.
4. The transmitter may not accept the data sent by the
receiver sometimes when many people race at the same
time.
The distance between two transmitters is too close. Please keep
more than 5 meters as far as possible.
5. The item number of acquisition module does not appear in
the transmitter screen.
The data cable of acquisition module is connected to the wrong
places.
The plug of data cable is damaged.
6. The unstable data of speed acquisition.
The position of speed sensor is not proper, which drifts too far.
7. The simulator can not be checked on the computer.
The USB simulator function of transmitter is not activated.
LED indicator alarm
LED indicator alarm function synchronizes with audible alarm
function. It has no effect on LED indicator after turning off the
audible alarm.
Please check as folIows:
1. The LED remains on: all functions are normal
2. The LED flashes slowly: the transmitter battery is low.
3. The LED flash is quickly:
- The battery of the transmitter is very low.
- Error rate is more than 60%.
- The battery of receive is low.
- The transmitter will turn itself off soon.
4. LED indicator is off: power off.
Alarm function description
Problem solving
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carson Reflex Wheel ultimate touch 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Wheel ultimate touch 2.0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info