Manual Carson Reflex Wheel Pro LCD (page 41 of 44) (English, German)

722298

Zoom out

Zoom in

1/44

CARSON Reflex Wheel Pro 50 050 0034 + 35 + 36 + 37

Adjustment Fail Safe

Connection from Transmitter to Receiver

1 23

1. Set the throttle and the steering wheel to the

normal position.

2. Turn on the transmitter and receiver.

3. Press the F/S SET button, the LED on the receiver

should start flashing.

4. Put the throttle trigger at the brake position,

press the “F/S SET” button, the LED should

become solid.

5. For electric models, put the throttle trigger at the

stop position when you are making the failsafe

setting.

Reflex Wheel Pro:

As soon as the receiver/transmitter signal is inter-

rupted, the receiver switches to the default throttle

failsafe setting.

Reflex Wheel Pro2:

The Reflex Wheel Pro2 is fitted with the „Failsafe

pro +“ system. This system also has integrated low

voltage protection. As soon as the voltage is too

low for safe operation, the receiver also switches to

the default throttle failsafe setting.

1. Turn on the receiver power.

Press the SW switch. The

receiver’s LED should start

flashing.

2. Turn on the

transmitter.

3. When the LED on the receiver

becomes solid, the binding

process is completed. The RC

system is ready.

Attention

Keep the transmitter and receiver not over

40 cm apart when setting and binding.

During the binding process

no other transmitter should be

operated in the vicinity at the

same time!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Wheel Pro LCD in the language / languages: English, German as an attachment in your email.

The manual is 6,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carson Reflex Wheel Pro LCD Manual

Product: