Manual Carson Reflex Stick Multi Pro LCD 14 Channel (page 21 of 28) (English, German, French, Italian)

722295

Zoom out

Zoom in

1/28

21 // GB

BINDING

TRIM

Trim is used primarily to correct a slight slanted position of the

servo lever. In addition, one has the option of precisely readju-

sting the model during operation, if it does not travel in a straight

line, for example, even though the control wheel is in the centre

position. Trim for CH1-CH4 - Example illustration: 1. Trim CH2 / 2.

Trim CH4.

Assigning a transmitter identifier to the receiver (binding)

In addition to control information, when the remote control is

operating, an electronic identifier is sent with each transmitter

impulse. This is how the receiver recognizes that the signal has

come from its own transmitter. Since many millions of transmitter

identifiers are available, it is extremely unlikely that a different

transmitter could influence your receiver.

Upon first use, however, the transmitter must communicate this

identifier to teach each new receiver. For this purpose, the follo-

wing process is necessary. To the degree possible, it should be

undertaken at a place where no other electrical signal – especially

not one from another 2.4 GHz transmitter – can interrupt this

transmission over the radio path.

1. Turn on the receiver power. Press the SW switch.

The receiver’s LED should start flashing.

3. When the LED on the receiver becomes solid, the binding

process is completed. The RC system is ready.

2. Turn on the

transmitter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carson Reflex Stick Multi Pro LCD 14 Channel in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carson Reflex Stick Multi Pro LCD 14 Channel Manual

Product: