583651
184
Zoom out
Zoom in
Previous page
1/188
Next page
184
MODE CONFIGURATION (cont)
ITEM EXPANSION RANGE UNITS DEFAULT CCN TABLE/
SUB-TABLE CCN POINT PAGE NO.
ECON Economizer Configuration ECON_CFG 23
EC.EN Economizer Installed No/Yes No: no FIOP
Yes: FIOP
ECONO 23
E.CTL Economizer Control Type 1=Dig/Posi
tion
2=Dig/Com
mand
3=Analog
Ctrl
1 ECON_CTL 14
EC.MN Econo Minimum Position 0 to 100 % 30
0: ERV FIOP
ECONOMIN 23
EC.MX Econo Cool Max Position 0 to 100 % 100 ECONOMAX 23
M.ANG Min Actuator Ctrl Angle 75 to 90 88 MINANGLE 23
EH.LO Econo Cool Hi Temp Limit 40 to 100 °F 65 OATLECLH 23
EL.LO Econo Cool Lo Temp
Limit
30 to 50 °F 0 OATLECLL 23
DF.DB Diff Dry Bulb Control Disable/En
able
Disable DIFFBULB 23
UEFC Unoccupied Free Cooling 0=Disabled
1=Unoc
cpied
2=PreOccu
pancy
2 UEFC_CFG 23
FC.TM Free Cool PreOcc Time 1 to 9999 mins 120 UEFCTIME 23
FC.LO Free Cool Low Temp Limit 30 to 70 °F 50 OATLUEFC 23
PE.EN Power Exhaust Installed No/Yes No: no FIOP
Yes: FIOP
PE_ENABL 24
PE.1 PE Stage1 Econo Position 0 to 100 % 40 PE1_POS 24
PE.2 PE Stage2 Econo Position 0 to 100 % 75 PE2_POS 24
EN.SW Enthalpy Switch 0=No Switch
1=Normal
Open
2=Normal
Closed
0: no FIOP
1: FIOP
ENTHLCFG 10
E.TRV Economizer Travel Time 5 to 300 secs 150 ECONOTRV 104
E.MXB Bottom Stage Max Econo 0 to 100 % 50 ECONMAXB 104
E.MXM Middle Stage Max Econo 0 to 100 % 35 ECONMAXM 104
E.MXT Top Stage Max Econo 0 to 100 % 25 (PG0316)
0 (2028, PM16)
ECONMAXT 104
AIR.Q Air Quality Config. IAQ_CFG 14
IA.CF IAQ Analog Input Config 0=No IAQ
1=DCV
2=Override
IAQ
3=Ctrl Min
Pos
0: no FIOP
1: FIOP
IAQANCFG 14
IA.FN IAQ Analog Fan Config 0=Never
1=Occupied
2=Always
0 IAQANFAN 30
II.CF IAQ Switch Input Config 0=No IAQ
1=DCV N/O
2=DCV N/C
3=Override
N/O
4=Override
N/C
0 IAQINCFG 30
II.FN IAQ Switch Fan Config 0=Never
1=Occupied
2=Always
0 IAQINFAN 34
AQ.MN Econo Min IAQ Position 0 to 100 % 10
0: ERV FIOP
IAQMINP 30
EC.MN Econo Minimum Position 0 to 100 % 30
0: ERV FIOP
ECONOMIN 23
OVR.P IAQ Override Position 0 to 100 % 100 IAQOVPOS 30
OA.CF OAQ Analog Input Config 0=No OAQ
1=DCV
2=Lockout
OAQ
0 OAQANCFG 30
OAQ.L OAQ Lockout Limit 0 to 5000 600 OAQLOCK 30
AQD.L AQ Differential Low 0 to 5000 100 DAQ_LOW 30
AQD.H AQ Differential High 0 to 5000 700 DAQ_HIGH 30
DF.ON Fan On AQ Differential 0 to 5000 600 DAQFNON 34
DF.OF Fan Off AQ Differential 0 to 5000 200 DAQFNOFF 34
I.4M IAQ Sensor Value at 4mA 0 to 5000 0 IAQ_4MA 30
I.20M IAQ Sensor Value at
20mA
0 to 5000 2000 IAQ_20MA 30
O.4M OAQ Sensor Value at
4mA
0 to 5000 0 OAQ_4MA 33
O.20M OAQ Sensor Value at
20mA
0 to 5000 2000 OAQ_20MA 33
H.4M RH Sensor Value at 4mA 0 to 50 % 0 RH_4MA 24
H.20M RH Sensor Value at 20mA 60 to 100 % 100 RH_20MA 24
48/50PG and PM
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrier 48 50PG C03-14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrier 48 50PG C03-14 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info