481319
13
Zoom out
Zoom in
Previous page
1/35
Next page
42ADF025, 42ADF035
Use of the Remote Control
GB
ENGLISH
11
Powerful (button F)
If you want more powerful capacity at Cooling, Dry and Heating
mode, press button
. On the display, the powerful icon will
start flashing.
1. Powerful at Cooling mode
Performs the powerful cooling operation
until room temperature reach 17°C or 20
minutes after pressing Powerful button. At
this mode, indoor fan speed is high and
compressor speed is over rating speed in
order to obtain maximum cooling capacity.
2. Powerful at Heating mode
Performs the powerful heating operation
until room temperature reach 32°C or 20
minutes after pressing Powerful button. At
this mode, indoor fan speed is high and
compressor speed is over rating speed in
order to obtain maximum heating capacity.
3. Powerful at Dry mode
Performs the effective dry operation until
room temperature in under 17°C or 3 hours
after pressing Powerful button. At this
mode, indoor fan speed is low in order to
remove humidity more effectively.
During Powerful mode, you cannot control room temperature, and
fan speed.
Press one of the buttons
. or E to cancel the powerful mode.
Economical E (button G)
If you want economical operation at cooling, heating and Auto
mode, press button E On the display, the economical icon E will
start flashing.
1. Economical at Cooling
mode
Automatically controls the room
temperature, fan speed and operation to
save energy.
1. Press E: Start and stop the operation
2. Economical at Heating
mode
Automatically controls the room
temperature, fan speed and operation to
save energy.
1. Press E: Start and stop the operation
3. Economical at Auto mode
Unit operates Economical cooling mode or
Economical heating mode depending on
room temperature.
During Economical mode, you can control room temperature and
flap position except fan speed.
Press one of the buttons
. or E to cancel.
Note: Under certain conditions, Economical mode may not provide
adequate heating or cooling due to energy saving features.
ON timer procedure
1. ON TIMER button
(button I)
Press this button, even if the remote
control is OFF. The relevant icon and time
figure will start to flash. If 10 seconds have
elapsed and no button is pressed, the
remote control turns OFF (if it was already
OFF when button
was pressed) or timer
function automatically deactivates.
2. HOUR/MINUTE buttons
(buttons
and )
If the unit is ON, the only possible selection
is the start-up time.The unit will operate
with the selections shown on the display.
3. HOUR/MINUTE buttons
(buttons
and )
If the unit is OFF: to select the start-up
time, use the temperature cotrol buttons
(buttons
and ).
First select the hours and, afrer have
confirmed these by pressing button
,
select the minutes using either button
or .
To definitively set the time, press button
again.
4. Operating mode
Choose the unit operating mode.The
icons will flash. To select the mode, use
the button
. Once the mode has been
decided, press button
. The icon of the
selected mode will stop flashing.
5. Desired temperature
To select the desired temperature, (the
value is flashing, use either button
or .
Push button
, to confirm the selection.
Numbers will stop flashing.
6. Fan speed
Choose the fan speed, using button
. When the selection has been completed,
press button
for confirmation. The icon
will stop flashing.
7. Louvre positioning
Now this icon is flashing.
Use button
, to select desired position.
Press button
for confirmation.
Now all icons are fixed on display.
If you want to cancel selections up to here
inserted, push button
; if you want to
cancel all options once timer has been set,
push button
and then .
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrier 42ADF025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrier 42ADF025 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Carrier 42ADF025

Carrier 42ADF025 User Manual - All languages - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info