Manual Carrera DIGITAL 124-30342 Lapcounter (page 3 of 4) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

469912

Zoom out

Zoom in

1/4

Assembly instructions

1 4

2 3

Before assembling please insert the connecting clips

in the track as shown in ﬁ gure

. Stick tracks together on a ﬂ at

base. Move the connecting clips according to ﬁ gure

in direction

of the arrow until they audibly snap in. The connecting clip may also

be inserted later. The connecting clips can be removed into both

directions by simply pressing down the clamped nose (see ﬁ g.

Fastening: To fasten the track sections on a board, it is neces-

sary to use the track section fasteners (Item no. 85209, not con-

tained in the package).

Note:

Carpeting is not a suitable foundation on which to build the track be-

cause of static charging, formation of ﬂ uﬀ and ready inﬂ ammability.

Coding/decoding of the cars to

the according speed controller

2x CLICK

1 2

2x CLICK

Place car on the track, push lane-change-button twice ﬁ g.

, lift car

at the front, put car back again ﬁ g.

, while car´s lights are ﬂ ashing

push lane-change-button twice ﬁ g.

. Programming is conﬁ rmed

by a tone. All settings are saved until new programming is carried

out.

False start

False start: If a car’s speed controller is actuated during the traﬃ c

light phase, this is rated as false start. The vehicle that has caused

the false start will travel a short distance and the LED on the rele-

vant vehicle or hand control will ﬂ ash. The race is not released and

the start has to be repeated.

Display and

range of functions

1 2

Range of functions

Training mode

Lap races possible from 0 – 9999 laps (factory setting 50 laps)

Time races from 00:00:00’01 – 99:99:99:999 hours

(hh:mm:ss’ms) (factory setting 00:05’00’’00)

The electronic lap counter Carrera DIGITAL 124 / 132 disposes of a

memory function. Once the values of the factory setting are changed

the altered values remain displayed until having been reset.

Signal tone and fanfare horn may be switched on and oﬀ by ac-

tivating the switch (ON/OFF).

Training mode

The training mode is used for training and the starting positions for

the race and can be started without setting the laps or time.

The training mode is set as follows:

1. Switch on the Black box (ON/OFF switch).

2. After approx. 1 second the central LED will illuminate perma-

nently and a brief acoustic signal will sound.

3. The Carrera DIGITAL 124 / 132 electronic lap counter automati-

cally switches on in training mode.

4. Press the start button of the Black Box once – all of the LEDs

are constantly lit.

5. Place the pre-coded car/s on the connecting track.

6. Then press the start button again – the starting sequence is initi-

ated, the LEDs are lit and acoustic signals can be heard.

7. The training run begins with elapse of the starting sequence and

the overall time (“TIME”) and counting begins.

8. The display shows the following information:

• Allocation of the individual cars (1-6)

• Total time of training race next to “TIME”

• Lap time currently driven “LAP TIME”

ATTENTION!

Single lap times exceeding 09:59:999 cannot be displayed, illustra-

tion see ﬁ g.

This does not aﬀ ect the total time illustration under

“TIME”.

While pushing BUTTON 1 during measuring, further information can

be retrieved.

• Press “BEST TIME” 1x – best lap time. Only beating the current

best time will again be displayed.

• Press “TIME” 2x – displaying the leading car (POS 1) and the other

cars´ time lag to the leading car

< 1 lap:

display of time diﬀ erence “+ m:ss:ms” to the leading car

> 1 lap:

display of lap diﬀ erence to the leading car “+ L 00001”

• Press “POSITION” 3x – current positioning of individual cars

• Press “LAPS” 4x – laps already driven

• Press 5x – change back to the current training race

9. For ﬁ nishing the training race, push BUTTON 3 (“ESC”) once

during the race. You will return to the main menu (the word “TRAIN-

ING” ﬂ ashes)

Race modes

Racing mode

1. For being able to switch to the racing mode after the electronic lap

counter Carrera DIGITAL 124 / 132 has automatically turned on via

the Black Box, please push BUTTON 3 (“ESC”).

2. The next display indication allows you to switch between the train-

ing- and the racing mode while pushing BUTTON 1 (“CHA”).

3. Conﬁ rm selection of the racing mode (the word “Race” ﬂ ashes) by

BUTTON 2 (“SEL”), the word “LAP” ﬂ ashes.

4. You have the choice between

lap race and

time races.

Lap Races

If you like to start a lap race (“LAP”) please conﬁ rm by pushing

BUTTON 2 (“SEL”).

After conﬁ rmation you may set the number of laps you like to com-

plete (it is possible to set lap races from 0000 to 9999 laps, factory

setting 0050 laps).

Basically you have to set the 1`s place ﬁ rst, then the 10`s place

and the 100`s place and ﬁ nally the 1000`s place (display cursor

ﬂ ashes on each place). By pushing BUTTON 1 (“UP”) you increase

the number. In order to change to the next places please push BUT-

TON 2 (“SEL”) and set the value as described. In case the preset

number of laps shall not be changed, please conﬁ rm by pushing

BUTTON 2 (“SEL”) until the lap display disappears.

After having set the number of laps push the start button of the

Black Box once – alle LEDs will ﬂ ash permanently.

5. Place the pre-coded car/s on the connecting track.

6. Then press the start button again – the starting sequence is initi-

ated, the LEDs are lit and acoustic signals can be heard.

7. The lap race starts after the start sequence has proceeded.

8. The total time “TIME” starts to run. Once the leading car has

passed through, its total time is displayed and updated upon each

passing.

9. The display shows the following information:

• Allocation of the individual cars (1-6)

• Total time of the leading car next to “TIME”

• Lap time currently driven “LAP TIME”

While pushing BUTTON 1 during measuring, further information can

be retrieved.

• Press “BEST TIME” 1x – best lap time. Only beating the current

best time will again be displayed

• Press “TIME” 2x – displaying the leading car (POS 1) and the

other cars´ time lag to the leading car

< 1 lap: display of time diﬀ erence “+ m:ss:ms” to the leading car

> 1 lap: display of lap diﬀ erence to the leading car “+ L 00001”

• Press “POSITION” 3x – current positioning of individual cars

• Press “LAPS” 4x – laps still to go

• Press 5x – change back to the current race

10. As soon as all cars have ﬁ nished the last lap a signal indicating

the end of the race is audible and the display starts to ﬂ ash.

11. For returning to the main menu push BUTTON 3 once („ESC“)

Time Racing

1. In order to measure the time of a time race please follow steps

1-3 (see lap races).

2. To start a time race after mode selection lap race (“RACE”) push

BUTTON 1 (“CHA”) for changing from the lap race mode (“LAP”) to

the time race mode (“TIME”).

3. Conﬁ rm selection of time race (“TIME”) by BUTTON 2 (“SEL”).

4. After conﬁ rmation the seconds´ position of the time display will

ﬂ ash (factory setting 00:05:00 min.).

5. Basically you have to set the seconds ﬁ rst, then the minutes

and ﬁ nally the hours (display cursor ﬂ ashes on each position). By

pushing BUTTON 1 (“UP”) you increase the number. In order to

change to the next positions please push BUTTON 2 (“SEL”) and

set the value as described. In case the preset racing time shall not

be changed please conﬁ rm by pushing BUTTON 2 (“SEL”) until the

ltime display disappears.

6. After having set the requested time for the race push the start but-

ton of the Black Box once – alle LEDs will ﬂ ash permanently.

7. Place the pre-coded car/s on the connecting track.

8. Then press the start button again – the starting sequence is initi-

ated, the LEDs are lit and acoustic signals can be heard.

9. The time race starts after the start sequence has proceeded.

10. The total time “TIME” starts to run backwards.

11. The display shows the following information:

• Allocation of the individual cars (1-6)

• Total time still to be driven “TIME”

• Lap time currently driven “LAP TIME”

While pushing BUTTON 1 during measuring, further information can

be retrieved

12. After the total time set has expired the race is ﬁ nished. A signal

will be audible and the display starts to ﬂ ash.

13. For returning to the main menu push BUTTON 3 once (“ESC”)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carrera DIGITAL 124-30342 Lapcounter in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carrera DIGITAL 124-30342 Lapcounter Manual

Product: