616841

Carrera 421 Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
34 35GBGB
Cleaning after wet shaving
1. Before cleaning, unplug the 5V plug
12
from the shaver (see fig. A
and B).
2. Use the on/off switch
6
to switch off the shaver.
3. Press both unlocking buttons
5
to release the shaving head
2
(see fig. E).
4. Pull off the shaving head
2
in an upward direction (see fig. A).
5. Carefully clean the inside and outside of the shaving head under
warm, running water (see fig. G).
6. Hold the shaver above the sink.
7. Carefully rinse the upper part of the shaver and the cutting blades
under warm, running water (see fig. H).
8. Use the on/off switch
6
to switch on the shaver without the shav-
ing head attached. Let it run for approx. 5–10 seconds to shake the
water drops off the cutting blades
4
.
9. Allow the parts to dry well.
10. Firmly attach the shaving head to the shaver until it locks into place
with an audible click (see fig. F).
11. Replace the protective cap
1
on the shaver.
The shaver is again ready for operation.
NOTES:
To dry the shaving foil frame
19
, remove it from the shaving head frame
20
. To do so, press the unlocking buttons
3
on both sides.
Apply 1–2 drops of acid-free oil (e.g. sewing machine oil) onto the
cutting blades and the long hair trimmer, especially after wet cleaning
and the replacement of spare parts. Let the appliance run for a couple
of seconds without using it. Use a soft cloth to wipe off the excess oil, if
necessary.
07. CLEANING AND CARE
DANGER! Risk of injury and material damage!
Unplug the mains adapter from the wall socket before cleaning
the appliance.
Never immerse the shaver in water.
WARNING!
Always switch off the shaver before cleaning.
CAUTION! Material damage
Do not use any harsh or abrasive cleaning agents.
It is advantageous to lock the shaving head during the cleaning
process. This also applies to the cleaning and replacement of the
foil or blade.
Neither remove the shaving foil frame from the shaving head
frame nor the shaving foil from the shaving foil frame. Do not
clean the shaving foil with the brush.
Do not pull the cutting blades off the holder to clean them.
Remove the shaving foil frame and cutting blades for replace-
ment only (see “Replacing the parts”, page 36).
NOTE: Clean the appliance after each use to maintain optimum
functionality.
Cleaning after dry shaving
1. Press the lateral unlocking buttons
5
and remove the shaving
head
2
.
2. Knock the shaving head on a flat surface and/or blow it out.
3. Clean the cutting blades with the cleaning brush (see fig. I).
CAUTION!
Do not use force and do not press onto the shaving foil!
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 421 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info