657650
15
Zoom out
Zoom in
Previous page
1/31
Next page
Carpigiani Labo XPL
15
DEEL 2. INSTALLATIE
2.1 VEREISTE RUIMTE VOOR HET GEBRUIK VAN DE MACHINE
De machine is alleen geschikt voor indoor gebruik.
De machine dient zodanig geplaatst te worden dat er aan alle zijden voldoende ruimte is voor
luchtcirculatie.
De machine moet vrij toegankelijk blijven zodat de operator zonder enige belemmering kan
handelen en in noodgevallen de werkplaats onmiddellijk kan verlaten.
Het is aan te raden om rondom de machine een ruimte van minimaal 150 cm vrij te laten voor de
toegang tot de machine, rekening houdend met de opening van de diverse panelen.
2.2 WATERAANSLUITING
De machine dient aangesloten te worden op het water waarvan de druk niet hoger is dan 0,8 MPa
(8 bar). Bij luchtgekoelde machines wordt de aansluiting van water onder de machine gemaakt.
Bij watergekoelde machines worden de aansluitingen onder op de achterkant geplaatst.
2.3 MACHINES MET LUCHTGEKOELDE CONDENSOR
Machines met een luchtgekoelde condensor dienen 50 cm vanaf de wand geplaatst te worden zodat
er voldoende luchtcirculatie rond de condensor is. Reinig de vloer onder en bij de machine
regelmatig om obstructie van luchtstroom te voorkomen. Daarnaast dient de machine maandelijks
gereinigd te worden om stof, papier en alle andere dingen die een juiste bediening voorkomen te
verwijderen.
2.4 MACHINES MET WATERGEKOELDE CONDENSOR
De machine dient te worden aangesloten op de waterleiding en afvoer. De waterdruk dient tussen
de 0,1 en de 0,8 MPa (1-8 bar) te zijn. De levering van het water moet tenminste gelijk zijn aan de
consumptie per uur. De water aanvoer dient aangesloten te worden op de „Water Inlet” en de
afvoer op de “Water Outlet”.
OPGELET
Machines met luchtgekoelde condensor moeten geplaatst worden op minimaal 50 cm
van de wanden om de lucht vrij te kunnen laten circuleren.
OPMERKING
Een slechte luchttoevoer belemmert de goede werking en de capaciteit van de
machine.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carpigiani Labo XPL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carpigiani Labo XPL in the language / languages: Dutch as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info