657664
10
Zoom out
Zoom in
Previous page
1/24
Next page
Suction pipe
10
2.7.2. Installation at different levels
If the remote group is installed higher than the unit (fig.
13), it is necessary to fit a siphon at the beginning of each
departure or upward section (a), at intervals of 1.8 metres
of difference in level along the return pipe, and at every
arrival (b).
If the remote unit is installed lower than the unit, siphons
are not necessary (fig. 12).
Fig.12 Fig. 13
Installation at
dierent levels
2.7.3. Refrigeration connection of remote groups
Diameters for appliance feed pipes are sized in accor-
dance with the installation distance up to a maximum of
15 metres (
see table 7).
For greater distances please consult the manufacturer.
The insulation of suction and hot gas pipelines
must be carried out using good quality insulators of the
closed-cell type having a minimum thickness of 19 mm.
Table 7
19 mm
Delivery line
Ø mm
Suction line
Ø mm
Hot gas line
Ø mm
Maximum pipe length: 15m
8108
2.9. CONNECTION OF WATER COOLED UNITS
When testing (mains water), make sure the machine
is at a standstill, that the water supply is ready and
that water is not coming out of the condenser drain
pipe; in this case, adjust the pressure valve until
water coming out is completely stopped (Fig. 17).
We suggest you install a gate valve and a viewable
filter on the water delivery pipeline. The condenser
water delivery and discharge pipes are indicated by
special nameplates. Both fittings are threaded 3/4”F.
See Table 3 for maximum water consumption
Fig. 17
CHARACTERISTICS OF THE LINE FOR
WATER COOLED UNIT
Maximum inlet pressure of water
Minimum inlet pressure of water
Maximum inlet water temperature to
ensure normal operation of the unit
1600 KPa
50 KPa
25°C (well water)
The conserver is supplied with a supplied condensate
water collection tray. A heater will provide for evapora-
tion of the water contained in the tray.
2.8. CONDENSATION DISCHARGE CONNECTION
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carpigiani Irinox NIce at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carpigiani Irinox NIce in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info