657664
6
Zoom out
Zoom in
Previous page
1/24
Next page
Check that the data on the plate and the electric
power supply characteristics correspond (V, kW, Hz,
no. of phases and available power).
The plate with the characteristics of the unit is found
on the right side of the conservation unit (fig.2) and
under the control panel.
Preparation of machinery rooms for the condensing
units must comply with fire prevention standards in the
country of installation. Contact the local fire department
for instructions.
Also keep in mind that the intervention of safety
valves or fuse plugs in the refrigerating circuit will result
in the immediate discharge in the environment of all the
coolant used. Please arrange for suitable disposal
methods and emergency measures as shown in the
coolant technical data sheet ( see par. 2.12).
Climatic classes:
4 (environment temperature 30°C with relative humidity
55% not condensing) according to CEI EN 60335-1
regulations, CEI EN 60335-2-89, ISO 23953-2:2005(E).
6
2. INSTALLATION
2.1. PLATE DATA
2.2. POSITIONING
Fig. 2
31010
CORBANESE (TV)
ITALY
Mod.
y/n
Compressor HERMETIC
V
A
Refrigerant R404 Charge
Design pressure (Low)
Design pressure (High)
Rated Load
Class Volume
PED Code
IP
KPa
KPa
Kw
Ph Hz
Model
Serial number
mm/yy/progres.
Frequency
Power
Phase
Power input
Volt
The machine must be installed and tested by fully
respecting the accident-prevention standards, traditi-
onal precautions and the laws in force.
The installer must check for any fire-prevention rules
(consult the local fire department for instructions).
Place the machine in its location.
Permanently level the appliance by means of the
adjustable feet. Use special hoisting apparatus for
the heaviest machines (fig. 3).
If the cells are not levelled, their proper functioning and
the drainage of condensation may be jeopardized.
Avoid (Fig.4):
Places exposed to direct sunlight
Closed locations that are hot and have poor air circu-
lation ( see table 2).
Avoid installing the machine near any source of heat.
Fig. 3
Fig. 4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carpigiani Irinox NIce at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carpigiani Irinox NIce in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info