657687
41
Zoom out
Zoom in
Previous page
1/66
Next page
EVD 1
41
2012
DEEL 4. CONTROLE EN VOEDSELVEILIGHEID
4.1 ALARMMELDINGEN
De machine is uitgerust met een automatische "CHECK" die eventuele storingen aan de machine
signaleert.
Als een alarm is opgetreden dat later is opgelost, zal het alarm in de display blijven staan met de melding
dat dit alarm is opgelost (knippert niet).
Dit bericht kunt u verwijderen door op te drukken.
De machine kan gebruikt worden, zelfs als er een alarm actief is. Wanneer het alarm kritisch is, zal de
machine de productiemode blokkeren. U dient de machine dan in STOP te zetten en deze te laten staan
totdat er een monteur is geweest ter reparatie.
Wanneer de machine naar STOP gaat, zal de display automatisch deblokkeren.
In onderstaande tabel kunt u zien welke alarmmeldingen op de display kunnen verschijnen:
Alarm
Beschrijving
Mix End
Dit wordt aangegeven wanneer het minimale mixniveau is bereikt.
Mix End
Dit symbool wordt aangegeven wanneer het gemiddelde mixniveau is
bereikt.
Cylinder safety thermostat
(TESC)
Cilinder veiligheidsthermostaat aangesproken.
De machine gaat in STOP.
Tank safety thermostat
(TESV)
Hopper veiligheidsthermostaat aangesproken.
De machine gaat in STOP.
Beater safety thermostat
(PTMA)
Beveiliging van de roerwerkmotor aangesproken.
De machine gaat in STOP.
Pressure Switch
(PR)
Drukschakelaar aangesproken. Machine gaat in STOP als:
het 3 keer in 1 uur gebeurt;
het langer dan 2 minuten aanhoudt.
Wanneer de machine in PASTEURISEREN stond, zal dit programma
opnieuw worden gestart.
Kijk na of de waterstroom voldoende is.
Comp. Thermal relay
(RTC)
Thermische beveiliging van de compressor aangesproken.
De machine gaat in STOP.
Tank sensor alarm
(TEV)
Temperatuursensor in de voorraadtank is defect.
Kritisch alarm: de machine gaat vanuit PRODUCTIE, BEWAARSTAND en
PASTEURISATIE in STOP.
Cylinder sensor alarm
(TEC)
Temperatuursensor in de cilinder is defect.
Kritisch alarm: de machine gaat vanuit BEWAARSTAND en
PASTEURISATIE in STOP. Als de machine in PRODUCTIE stond, zal deze
dat ook blijven.
Tank evaporator sensor
(TGV)
Temperatuursensor verdamper van de voorraadtank is defect. De
machine gaat niet in STOP.
Door Open
(IMS)
Tapkop is open.
Evap. Sensor alarm
(TE1)
Verdampersensor cilinder is defect. De machine gaat niet in STOP.
Blackout
Er is stroomuitval geweest.
Ice Cylinder
(ICE)
IJs aan de binnenkant van de cilinder. Wanneer de temperatuur van de
cilinder in PRODUCTIE onder de kritische temperatuur komt wordt dit in
de geschiedenis opgeslagen.
Dit alarm kan ontstaan door een slechte cilindervulling. Controleer de
pompwerking. Het alarm wordt gereset wanneer de temperatuur in de
cilinder toeneemt. Als het alarm optreedt in STOP-stand, dient u de
TE1-sensor te vervangen.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carpigiani EVD 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carpigiani EVD 1 in the language / languages: Dutch as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info