570128
18
Zoom out
Zoom in
Previous page
1/20
Next page
Fitting instructions
1. Place the blanket directly on the mattress, with the control
switch end at the head of the bed.
2. The blanket must be positioned to the mattress in the following
manner. Place the blanket directly on the mattress and ensure
that a space of 10-15cm (4-6 inches) is left between the bottom
edge of the blanket and mattress. Position the blanket on the
bed ensuring the pillow area is clear. (G).
•Eachblanketisttedwith3tietapes.
•Donotstretchthetapetootightly.Allowsome‘give’toavoid
edge distortion. Ensure knots are not tied too tightly so that
they can be undone easily.
3. Pass the rst tape (1) under the corner of the mattress.
4. Thread up through the centre eyelet.
5.Passundertheadjacentcornerandtieotooppositeloop.
6.Repeatforthesecondtape(2)atoppositeendoftheblanket.
7. Pass the centre tape (3) underneath the mattress and tie to
opposite loop.
•Ifthetapeistoolongyoucancutotheends.
Operating instructions model EB1500 and EB2000
Switchcontrol(C)
1. Illuminated heat setting light
2. Heat levels 2 and 3
3. Heat level 1
4. Braille markings
5. Oposition
6.Footwarmthonlyon/oswitch
How to use switch
1. Ensure the blanket is tted to the bed correctly.
2. Plugthepowerleadintotheclosestsocket,usinganextension
lead if needed to ensure that the lead is not stretched.
Preheating the bed
Move the heat setting on the control switch to heat level 2 and 3,
dependingontheleveloftheheatrequired.Allowapproxima-
tely 60-90 minutes for the blanket to heat the bed thoroughly,
although this time may vary depending on the room temperature
and type of bedding used.
Foot warmth
Models EB1500 and EB2000 have the possibility to switch on
separate and only the foot warmth function. Move the heat setting
on the control switch to the level indicated with foot symbol.
Switchothefootwarmthafterreachingcorrecttemperature.
The foot warmth is too warm for all night use.
All night use
• Movetheheatsettingonthecontrolswitchtoheatlevel1.
• Thissettingwillprovidesafeandcomfortableheattosleepon
all night.
• Thissettingcanbeusedtoairthebed.
Warning!
Always ensure that the heat setting is moved to the OFF position
whenyougetupthenextday,orafterairingthebed.
Braille markings
• Braillemarkingsarelocatedonthebackoftheswitchtohelp
identify the direction of the heat level in the dark, or if visually
impaired.
• Thehighestheatlevel‘preheat’isidentiedby3raisednodu-
les,midlevel’by2raisednodulesandlowlevel’(allnight)by
1 raised nodule Fitting underblanket.
Fitting instructions
1. Place the under blanket directly on the mattress with the control
switch end at the head of the bed. Do not turn the blanket over,
ensure that the socket on the blanket is facing upwards.
2. Fit the shaped corners to the mattress and turn the elasticated
edges of the skirt under the mattress (E).
3. Ensure all creases are smoothed out and the skirt ts tightly
round the sides of the mattress.
Cleaning and maintenance
• Examinefrequentlyforanysignsofwearordamagetothe
blanket, switch or cord. In case of damage or misuse, please
return immediately following instruc tions under servicing.
• Iftheblanketfailstoperate,checkthefollowingbeforereturning:
1.
Ensure that the plug and socket have not become disconnected.
2. Checkthatthesupplyplugiscorrectedtottheex.
Noattemptshouldbemadetorepairtheblanketorhaveit
repaired locally and the switch supplied must never be replaced
other than by the manufacturers since the specialized compo-
nents are not generally available.
Storage
Tostore,foldcarefullyandplacebackintooriginalpackaging.
• Whenstoringtheblanket,allowittocooldownbeforefolding.
• Donotcreasetheblanketbyplacingitemsontopofitduring
storage.
18•English
Blankets_Manual A5.indd 18 10-10-2011 10:42:09
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carmen EB1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carmen EB1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info