Manual Carmen CIL1001W (page 19 of 40) (English, German, Dutch, French)

789124

Zoom out

Zoom in

1/40

1.3 Usage

• Position the infrared lamp as described in the instructions for use.

• Prepare the desired treatment distance.

• Switch on the infrared lamp as described in the instructions for use for the infrared lamp.

• Sit down in preparation for the application.

• Hold the protective goggles to your eyes and pull the rubber band over your head. To make the rubber band longer/

shorter, pull on the strap at the side.

• To end the application, first take off the protective goggles. Then switch off the infrared lamp.

Replace the product after a period of use of 3 years.

1.4 Storage

If you do not plan to use the protective goggles for an extended period of time, we recommend storing it in its original

packaging in a dry environment, ensuring that it is not weighed down by other items.

1.5 Cleaning

Clean the protective goggles from time to time. Use a slightly damp, soft cloth to clean it. Do not use any sharp or abrasive

cleaning products.

1.6 Technical data

Model EP 10

Protection level 4 -10 in accordance with EN171:2002

Protective eyewear designation 4-10 BEU CE

The code for the lenses is comprised of the following:

- Initial number for IR protection filter (1st part of code)

- Protection level number (2nd part of code)

- Manufacturer’s code (3rd part of code)

- CE mark (4th part of code)

Light transmission level Max. 0,023%,

min. 0,0085%

Maximum average spectral transmittance value with infrared 780 - 1400 nm: 0,050%

780 - 2000 nm: 1,3%

.Changing the lamp

The device must always be switched off, disconnected from the mains and allowed to cool down before changing the

infrared lamp.

The procedure for replacing the infrared lamp is as follows:

1. To remove the protective cover, unscrew the screw on the side using a screwdriver.

2. Carefully pull the protective cover off the device.

3. Unscrew the old infrared lamp from the device.

4. Fully screw the new infrared lamp into the device.

5. Place the protective cover back on the device.

6. Tighten the screw on the side of the protective cover using a screwdriver.

7. Check that the protective cover is firmly attached to the device.

Please note that only infrared lamps of the original type, R95E (100W), may be used as replacements.

WARNING

• Do not touch the infrared lamp or unscrew it when it is connected to the mains.

• Unplug the device, to avoid the risk of electrocution.

• In the interest of environmental protection, do not dispose of the device in household waste.

19 • EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carmen CIL1001W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carmen CIL1001W Manual

Product: