614537
9
Zoom out
Zoom in
Previous page
1/21
Next page
6. When replacing the needle clamp, make
sure the needle bar is in its highest
position. Slide the clamp up onto the
needle bar until the top of the clamp.
Tighten the needle clamp fixing screw
clockwise with 1.5mm hexagon wrench.
Note:
5. To remove the individual outer needles,
loosen the needle fixing screw on the
needle clamp by turning the 1.5mm
hexagon wrench counter-clockwise and
remove the needle(s). Insert the new
needle(s) until the top of the needle
touches the top of the needle hole. Tighten
the needle fixing screw with 1.5mm
hexagon wrench by turning the hexagon
wrench clockwise.
4. Hold the needle clamp, lower it slowly and
remove it from the needle bar.
3. Loosen the needle clamp holder fixing
screw by turning the 1.5mm hexagon
wrench counter-clockwise.
2. Loosen the presser height adjusting screw
and take it off, remove the cloth presser.
1. turn the hand wheel until the needle bar is
at the highest position.
Note:
Changing the needle(s)
Use #S1037 needles for the needle felting
machine.
Do not use any other type of needles.
Caution:
#S1037 needles do not have a front or back,
therefore,you can insert the needle in any
direction.
When you change needle(s), unplug the power
cord from the wall outlet.
#S1037 needle is a very special needle and is
exclusive for the needle felting machine.
See your retailer for replacement needles.
4. Maintenance
7
Needle clamp
holder
Groove
(inside holder)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Punching at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Punching in the language / languages: English, German as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info