614537
6
Zoom out
Zoom in
Previous page
1/21
Next page
ON
OFF
4
2. Setting up machine
4. Cloth Press
The cloth presser is to prevent
cloth/fabric/materials
from flapping during the felting process.
Place the cloth/fabric/materials on the
needle plate and under the cloth presser.
Loosen the presser height adjusting
screw to adjust the height of the cloth
presser until you get the correct height for
your cloth/fabric/material, then tighten the
presser height adjusting screw.
The cloth/fabric/materials should move
freely under the cloth presser without any
restrictions.
3. Felting speed
The felting speed can be adjusted by
increasing or decreasing the pressure on the
foot controller.
2. Polarized Plug
This appliance has a polarized plug(one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If is still does not fit,
contact a qualified electrician to install the
proper outlet.
Do not modify the plug in any way.
Use only foot controller provided with this
machine.
(Type 4C-316B for U.S.A. & CANADA only)
1. Attaching the foot control
Plug the power cord of foot controller into
machine socket, then into a wall outlet.
Always make sure the power is off and
remove the plug from the wall outlet when
the machine is not in use, or when making
any adjustments such as changing needles
or light bulb.
WARNING:
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Punching at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Punching in the language / languages: English, German as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info