614533
20
Zoom out
Zoom in
Previous page
1/29
Next page
Zipper foot
The zip foot can be inserted right or
left, depending on which side of the
foot you are going to sew.
To sew past the zip pull, lower the
needle into the fabric, raise the
presser foot and push the zip pull
behind the presser foot. Lower the
foot and continue to sew.
It is also possible to sew in a length
of cord, into a bias strip to form a
"welt".
According to thickness of fabric to
set stitch length control.
Needle position Stitch width Stitch length
Middle 0 1~4
Button sewing foot
Install the darning plate. This will cover
the feeddog and the stitch length will
be disabled
Position the work under the foot. Place
the button on the marked position,
lower the foot, adjust stitch width to "0"
and sew a few securing stitches.
Adjust the stitch width
. Turn the handwheel to check
that the needle goes cleanly into the
left or right hole of the button, and sew
on the button. Adjust the stitch width to
"0" and sew a few securing stitches.
If a shank is required, place a darning
needle on top of the button and sew.
For buttons with 4 holes, sew through
the front two holes first, push work
forward and then sew through the
back two holes as described.
according to the
button
.
Needle position Stitch width Stitch length
Left or Right Any 0
17
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Power Stretch 8360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Power Stretch 8360 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Carina Power Stretch 8360

Carina Power Stretch 8360 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info