792902
101
Zoom out
Zoom in
Previous page
1/116
Next page
100
- Set the machine as illustrated.
Remove the presser foot and the presser
foot holder.
Attach the darning plate.
Lower presser foot lever before starting
to sew.
Adjust the stitch width according to the
size of lettering or design
Draw the desired lettering or design on
the right side of the fabric.
Stretch the fabric between embroidery
hoop as firmly as possible.
Place the fabric under the needle. Make
sure the presser foot bar is down in its
lowest position.
Turn the towards you to bring
up the lower thread through the fabric.
Sew a few securing stitches at the
starting point.
Hold the hoop with thumb and
forefingers of both hands
* Embroidery hoop not included with
machine.
ou will find "S2" marking on the stitch
length dial of model Carina Power &
Stretch II additional.
-
-
-
-
.
-
-
-
-
-
Y
Preparation for Monogramming and
Embroidering*
Please Note:
handwheel
and guide the
embroidery hoop.
-
-
-
-
.
-
-
-
-
-
*
D
- Régler la machine comme illustré.
Retirer le pied et le support du pied-de-
biche.
Monter la plaque à broderie.
Baisser le levier de pied de biche avant
de commencer à coudre.
Ajuster la largeur du point selon la
grandeur des letters ou motifs
Dessiner les lettres ou motifs sur l'endroit
du tissu.
Tendre le tissu dans le cadre de
broderie.
Glisser le tissu sous l'aiguille. La barre
du pied doit se trouver dans sa position
laplus basse.
Tourner la manivelle vers vous de façon
à faire monter le fil du bas. Coudre
quelques point pour rabattre.
Tenir le cerceau à broder des deux
pouces et index et le guider.
Le cercle à broder n'est pas fourni avec
la machine.
ans le model Carina Power & Stretch II il
y a "S2" sur le bouton de réglage de la
longeur du point en plus.
Préparation du monogramme et de la
broderie*
Attention:
- Stroj nastavte podle obrázku.
- Odstra
- Upevněte vyšívací a stehovací destičku.
Než začnete šít, spusťte páčku přítlačné
patky.
- Měňte šířku stehu v závislosti na velikosti
písma nebo designu.
- Písmena nebo vzory, které budete
vyšívat, zakreslete na lícovou stranu
látky.
- Upevněte látku co nejpevněji do
rámečku.
- Položte látku pod jehlu. Dbejte na to, aby
byl dřík patky v nejnižší poloze.
- Otočte ručním ovládacím kolem k sobě,
čímž vytáhnete spodní nit. Ušijte několik
zajišťovacích stehů.
- Držte vyšívací rámeček palcem a
ukazováčkem obou rukou a posouvejte
jej.
*
ňte přítlačnou patku a držák
přítlačné patky.
Šicí stroj rámeček neposouvá.
Příprava pro monogramy a vyšívání
Upozorňujeme:
Model je na
tlačítku pro délku steh se navíc nachází
poloha "S2".
Carina Power & Stretch II
Monogramy a vyšívání
s rámečkem
Monogrammes et broderie
Monogramming and
embroidery
FR
CZ
EN
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Classic II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Classic II in the language / languages: English, German, French as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info