792902
79
Zoom out
Zoom in
Previous page
1/116
Next page
78
Set the machine as illustrated.
. Place the right sides of the fabric
together.
Sew a seam in the width of the seam
allowance from the right edge to the
zipper bottom stop position. Sew a few
stitches in reverse to lock. Increase the
stitch length to maximum, set the
tension below 2, and baste the
remaining length of the fabric.
. Press open the seam allowance. Place
the zipper face down on the seam
allowance with the teeth against the
seam line. Baste the zipper tape in
place.
. The zipper foot can be inserted right or
left, depending on which side of the foot
you are going to sew.
. Stitch around the zipper on the right
side of the fabric, then remove the
basting.
You will find "S2" marking on the stitch
length dial of model
additional.
1
2
3
4
Please Note:
Carina Power &
Stretch II
1
2
3
4
. Mettre les côtés endroit du tissu l'un sur
l'autre.
Coudre une couture aussi large que le
bord, du bord droit jusqu'à la fin de la
fermeture éclair. Coudre quelques
points pour rabattre. Mettre la longueur
de point maximale, réglez la tension en
dessous de 2, et coudre le fil restant à
la main.
. Ouvrir la couture et la répasser. Mettre
la fermeture éclair du côté endroit sur
le bord et les dents de la fermeture sur
la couture. Coudre la fermeture à la
main.
. Le pied de biche peut se monter du
côté gauche ou du côté droit, tout
depend de quel côté vous cousez.
. Piquez autour de la fermeture à
glissière sur le côté droit du tissu, puis
retirez le bâti.
Régler la machine comme illustré.
Attention:
Dans le model Carina Power & Stretch II il
y a "S2" sur le bouton de réglage de la
longeur du point en plus.
Stroj nastavte podle obrázku.
Pro zajištění švu ušijte několik zadních
stehů. Zvyšte délku stehu na maximum,
nastavte napětí nitě na 2 a sestehujte
zbytek švu podél látky.
2. Záložku na šev rozžehlete. Umístěte zip
pravou stranou na záložku na šev a
zoubky zipu na linii švu. V této poloze
zip sestehujte.
3. Patku na přišívání zipů lze upevnit jak
vlevo, tak i vpravo, podle toho, na které
straně se má šít.
4. Přišijte zip z pravé strany látky a poté
odstraňte stehovací stehy.
1. Složte obě pravé strany látky k sobě.
Ušijte spodní steh v šířce záložky na
šev od pravého okraje, až po spodní
šev pro zip.
Upozor :ňujeme
Model je na
tlačítku pro délku steh se navíc nachází
poloha "S2"
Carina Power & Stretch II
Zipy
Fermeture éclair
Zippers
FR
CZ
EN
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Classic II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Classic II in the language / languages: English, German, French as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info