792902
73
Zoom out
Zoom in
Previous page
1/116
Next page
72
It is suggested that you always sew a test
buttonhole on a sample of your fabric. The
fabric should be stabilized especially when
sewing thin and stretch fabrics.
Using tailor's chalk, mark the position of
the buttonhole on the fabric.
Attach the buttonhole foot and set the
stitch selector dial to " ".
Set stitch length dial to " ". Set the stitch
width at "5". The width however may need
to be adjusted according to the project,
sew a test first to determine this.
1. Open the button plate and insert the
button.
2. Lower the presser foot aligning the
marks on foot with the marks on the
fabric. (The front bar tack will be sewn
first.)
3. Lower the buttonhole lever and gently
push it back. While lightly holding the
upper thread, start the machine.
4. Buttonhole stitching is done in the order.
Stop the machine when the buttonhole
cycle has completed.
5.
Making a Buttonhole
Use seam ripper and cut buttonhole
open from both ends towards the
middle.
Il est conseillé de faire d'abord un essai de
boutonnière sur un morceau du tissu
originale. Renforcer le tissu, surtout si vous
utilisez des tissus fins ou extensibles.
arquer l'endroit de la boutonnière avec de
la craie de couture sur le tissu.
onter le pied de biche à boutonnières et
mettre le bouton de choix de points sur " ".
Mettre la longueur de points à " ".
ettre la largeur de points à "5". La largeur
de points peut varier par boutonnière, c'est
pour cela qu'il faudra toujours faire un essai
avant.
. Étendre la plaque pour boutons et placer
le bouton.
. Baisser le pied de biche, de façon à ce
que les marquages sur le pied de biche
et le tissu correspondent. (le haut de la
boutonnière sera cousu en premier)
. Baisser le levier de boutonnière et
pousser le doucement en arrière. Tenir
souplement le fil et commencer à
coudre.
. La boutonnière est cousue en plusieures
étapes. Après avoir fini toutes les étapes
la machine peut être arrêtée.
. Utiliser le découseur pour ouvrir la
boutonnière des deux côtés par le milieu
Coudre un boutonnière
M
M
M
1
2
3
4
5
Doporučuje vždy ušít jednu zkušební
knoflíkovou dírku na kousku látky.
". Šířku stehu
nastavte na "5". Šířka stehu se však může
podle typu šitého projektu lišit, proto si
nejprve ušijte zkušební knoflíkovou dírku.
Látku byste měli podložit stabilizační
podložkou, zvlášť pokud pracujete s
tenkou nebo elastickou látkou.
Křídou si na látce označte polohu
knoflíkové dírky.
Upevněte patku na knoflíkové dírky a
vyberte na voliči stehů " ". Volič délky
stehu nastavte na "
1. Vytáhněte přídržnou destičku na
knoflíky a vložte do ní knoflík.
2. Spusťte přítlačnou patku a vyrovnejte
značku na značku na látce. (Přední
zapošívací steh se šije jako první.)
3. Spusťte páčku na knoflíkové dírky a
zatlačte ji lehce dozadu. Začněte šít,
zatímco budete zlehka přidržovat vrchní
nit.
4. Šití knoflíkové dírky se provede v
daných krocích. Po všech provedených
krocích je možné stroj zastavit.
5. Použijte odstraňovač švů, kterým
proříznete knoflíkovou dírku z obou
stran ke středu.
Šití knoflíkové dírky
Šití knoflíkových dírek v 1
kroku
Couture de boutonnières en
1 étape
Sew 1-step buttonholes
FR
CZ
EN
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Classic II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Classic II in the language / languages: English, German, French as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info