Manual Caremaxx 60500 (page 12 of 27) (English, German, Dutch, French, Spanish)

732453

Zoom out

Zoom in

1/27

Now with your Bionase from Caremaxx

you can quite easily carry out yourself what

until recently was only available as a very

cost-intensive therapy in special centres.

Diodes that are able to emit red light of

exactly the right wavelength (approx.

660nm) have been developed for the

Bionase. Alleviation of allergic symptoms

and lessening of the over-sensitivity of the

nasal mucosa sets in at this wavelength.

The beneﬁts of your phototherapy with

Bionase:

• Phototherapyisadrug-freetreatment.

• Thehighlyeffectiveapplicationlasting

only approx. 4 minutes can be carried

out practically anywhere.

• Thetreatmenthasnoeffectonother

organs or body parts due to its use

locally.

The typical symptoms of hay fever were

signiﬁcantly reduced in a clinical test

using the Bionase. Some symptoms were

alleviated or even eliminated completely

in a matter of only a few hours. In the

majority of patients it was possible to

identify a clear improvement in the

condition within two weeks.

3 Starting up

Packaging / scope of supply

We would like our high-quality medical

products to reach you in the same condition

as they left us. For this reason your Bionase

is packed in a sturdy protective package

made from environmentally compatible

materials. If you do not want to use the

box for storing the appliance, it may be

sent for recycling with your waste paper.

Please dispose of the plastic ﬁlms at the

local waste site. The package contains the

following parts:

• 1Bionaseappliance

• 1Battery(monobloc9Volt,6LR61)

• 1Nasalapplicator

• 1Instructionsforuse

Please consult your dealer if you discover

that the appliance is damaged or fails to

function as expected after unpacking.

Activation / replacing the battery

Important: The 9V monobloc battery

is already inserted on delivery of the

appliance. The contacts are protected

with an insulating strip to prevent the

battery from discharging. This insulating

strip must be removed prior to starting

the appliance up for the ﬁrst time. Press

down on the symbol on the battery

compartment lid (back of the appliance)

and at the same time slide it in the

direction of the arrow. Now pull out the

insulating strip by the tab. Then replace

the battery compartment lid and slide it

upwards until it clicks audibly into place.

After approx. 100 applications, the green

pilot LED will ﬂash after pressing the ON

button if the battery power is insufﬁcient

for another application. Open the battery

compartment (as describes above), remove

the spent battery and insert a new 9 volt

monobloc battery 6LR61 (in the position

shown inside the battery compartment).

Close the battery compartment again.

Caution! Batteries may not be disposed

of with your domestic waste under any

circumstances. Hand them in to your

dealer or to your local collection point for

recycling.

4 Phototherapy with Bionase

Use of the Bionase appliance

• Insert the plug on the cable of the

nasal applicator into the socket of

your Bionase appliance.

• The nasal applicator must be spread

slightly apart to allow the LEDs to be

inserted in the nostrils. Insert the LEDs

as far as possible into the nostrils. The

nasal applicator should nevertheless

sit comfortably.

• Press the ON button to start the

treatment and begin light emission.

The green pilot LED on the front of

your Bionase will be lit constantly

during use.

• Light emission will be ended

automatically after approx. 4½

minutes. The green pilot LED will go

out thus indicating that the application

has ended.

• Now remove the applicator from the

nostrils.

Notes:

• If the green pilot LED ashes this

indicates that the cable is not

plugged in correctly or that there is

insufﬁcient voltage in the battery for

an application.

• If the green pilot LED neither lights

up nor ﬂashes this indicates that the

battery has been incorrectly inserted

or is completely discharged.

Duration and frequency of application

• An application with the Bionase

appliance only lasts approx. 4 minutes.

During this time, the LEDs radiate red

light having a wavelength of approx.

660nm and a deﬁned intensity. The

automatic shut-off ensures that the

duration of treatment always remains

the same and prevents the nasal

mucosa from being overloaded.

• TheBionaseshouldbeusedthreetimes

a day at the beginning of treatment.

• Treatment should be spread over the

course of a day. The ﬁrst application

should be carried out either before

or after breakfast and the last in the

evening before going to bed whilst

the third application can be carried

out during the day simply by taking

the appliance with you and using it

when the opportunity arises.

Note:

The application should be continued for

at least one week and preferable two to

achieve the desired treatment result.

Preventive treatment

Your Bionase appliance may be used not

only in the acute phase of the illness but

also as a preventive measure. You will

most likely know the period during which

your allergy starts or the type of pollen

that causes it.

Find out about the current pollen count

situation, e.g. on the internet. This way you

can gain experience of when the different

types of pollen are likely to be most active

in your area and take preventive measures

in good time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caremaxx 60500 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caremaxx 60500 Manual

Product: