602724

Care ERGOS IV - 50582 Manual

10
Zoom out
Zoom in
Previous page
1/41
Next page
Setting Parameters for Manual
Selecting “Manual” using PROGRAM key then pressing MODE, 1
St
parameter “Time” will flash so value can be
adjusted using UP or DOWN key.Press MODE to save value & move to next parameter to be adjusted. Continue
through all desired parameters, start pedaling to start workout.
Start Pedaling to start Workout, using UP or DOWN key adjusts resistance load during workout.
User Program
User program allows user to create their own program that can be used immediately and on subsequent workouts.
Create User Profile
Selecting user mode using PROGRAM key, press MODE key to enter “User” mode. The text window will display”
Select Profile” 4 seconds , meanwhile Segment 1 will flash. Adjust UP or DOWN key to set desired resistance
load. Press MODE key to move to next segment continue for all 10 segments.
Setting Parameters for User Program
After that 1
st
parameter “Time” will flash so value can be adjusted using UP or DOWN key.Press MODE key to
save value & move to next parameter to be adjusted. Continue through all desired parameters, start pedaling to
begin workout.
Note: The final 10 segments profile will be saved for future workouts.
Start Pedaling to start Workout. Using UP or DOWN key adjusts resistance load during workout
Interval Program
Selecting “Interval ” pressing PROGRAM key then pressing MODE key. The text window will display SELECT
PROFILE LEVEL” 3 seconds.There are 3 levels (L1,L2,L3) can be select, using UP or DOWN key then pressing
MODE key to confirm.
Setting Parameters for Interval
After that 1
st
parameter “Time” will flash so value can be adjusted using UP or DOWN key.Press MODE key to
save value & move to next parameter to be adjusted. Continue through all desired parameters, start pedaling to
start workout.The resistance could not be adjusted by using UP or DOWN key during workout.
WATT Program
Selecting “WATT ” pressing PROGRAM key then pressing MODE key. The text window will display “SELECT
WATT” 3 seconds, Meanwhile “50” will flash. Selecting WATT value from 50 W to 350W use UP or DOWN key
then pressing MODE key to confirm.
Setting Parameters for WATT
After that 1
st
parameter “Time” will flash so value can be adjusted using UP or DOWN key.Press MODE key to
save value & move to next parameter to be adjusted. Continue through all desired parameters, start pedaling to
begin workout.
Start Pedaling to start Workout, using UP or DOWN key adjusts WATT value during workout.
Note: Computer will adjust the resistance load automatically depends on the speed to maintain the
constant watt value. User can use up /down key to adjust the watt value during workout.
HRC PROGRAM
Setting Parameters for Heart Rate Control
Selecting “HRC” pressing PROGRAM key then pressing MODE key. 1
St
parameter “Time” will flash so value
can be adjusted using UP or DOWN key. Press MODE key to save value & move to next parameter to be
adjusted. Continue through all desired parameters, start pedaling to start workout.
Note: If pulse is above or below(±
±±
± 5) the set target pulse , computer adjust the resistance load
automatically.
It will check Every 10 seconds approx. 10W will increase or decrease (Note: during the workout. If
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Care ERGOS IV - 50582 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Care ERGOS IV - 50582 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info