602722

Care Alpha II - 50503 Manual

8
Zoom out
Zoom in
Previous page
1/29
Next page
7. CALORIES: Your computer will estimate the cumulative calories burned at any given time during your
workout.
8. PULSE: Your computer displays your pulse rate in beats per minute during your workout. If no pulse
signal input then the computer will display “NO pulse” on the window.
9. RPM: Your pedal cadence.
Key function:
There are 6 button keys and the function description as follows:
1. UP key: During the setting mode, press the key to increase the value of Time, Distance, Calories, Age,
Weight, Height etc. and to select sexy. During the CLOCK mode, you can set up clock and
alarm by this key.
2. DOWN key: During the setting mode, press the key to decrease the value of Time, Distance, Calories,
Age, Weight, Height etc. and to select sexy. During the CLOCK mode, you can set up
clock and alarm by this key.
Note: During the setting mode, you can hold UP and DOWN keys together for over two seconds then the
setting value will reset to Zero or default value.
3. ENTER/RESET key: a. Press the key to accept the current data entry.
b. During the “NO SPEED” mode, by holding this key for over two seconds then the
computer will re-power-on.
4. BODY FAT key: Press the key to enter your personal data before measure your body fat ratio.
5. MEASURE key: Press the key to get your body fat ratio and BMI and BMR.
a. FAT %: Indicate your body fat percentage after measurement.
b. BMI (Body Mass Index): BMI is a measure of body fat based on height and weight that applies to
both adult men and women.
c. BMR (Basal Metabolic Rate): Your Basal Metabolic Rate (BMR) shows the number of calories your
body needs to operate. This doesn’t account for any activity, it’s simply the energy needed to
sustain a heartbeat, breathing and normal body temperature. It measures the body at rest, not
sleep, at room temperature.
6. PULSE RECOVERY key: Press the key to activate heart rate recovery function.
F=1.0 means OUSTANDING
1.0F2.0 means EXCELLENT
2.0F2.9 means GOOD
3.0F3.9 means FAIR
4.0F5.9 means BELOW AVERAGE
F=6.0 means POOR
Error Message:
E: The speed over than 999.9 MPH/KPH then the computer will display “E”.
Err: When measure the body fat function or pulse recovery function, if there is no pulse signal input within 20
seconds then the computer will display “Err”. You can repress any keys to quit the Err message.
How to replace the batteries:
Please move out the battery cover from the bottom housing then replacement the batteries. The instruction
as below,
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Care Alpha II - 50503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Care Alpha II - 50503 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info