667729
9
Zoom out
Zoom in
Previous page
1/50
Next page
4.4 BASIC FUNCTIONS
To turn the volume up for current audio source:
Tap .
With each tap, a louder tone is played on the speaker until you reach the maximum volume, as indicated by the
maximum volume tone.
To turn the volume down for current audio source:
Tap .
With each tap, a quieter tone is played on the speaker until you reach the minimum volume, as indicated by the
minimum volume tone.
To mute the microphone completely and lower the speaker volume to the minimal level when an audio source is active:
Tap and .
A descending tone is played on the speaker.
To unmute the microphone and raise the speaker volume to the previous level when an audio source is active:
Tap and .
A ascending tone is played on the speaker.
Automatic Gain Control (AGC) adjusts your speaker volume according to ambient noise and riding speed. To
adjust AGC sensitivity, see Configuring Your SMARTH Basic Settings through the SmartSet App on page 36.
4.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES
Your SMARTH has two Bluetooth channels for connection to Bluetooth devices such as mobile phones, GPS devices
and Bluetooth music players with A2DP.
To connect your SMARTH to a Bluetooth device, you must first pair them while in Standby (see SMARTH Modes and
Events - LEDIndications on page 49). Once paired, they automatically recognize each other whenever they are within
range.
4.5.1 PAIRING THROUGH THE UNIT BUTTONS
If you are pairing more than one device, Cardo recommends that you pair the mobile phone to channel 1, and the
additional device (such as GPS, music player or additional mobile phone) to channel 2.
To pair Bluetooth channel 1 to a mobile phone:
1. Enable Bluetooth on the mobile phone.
2. Press for 5 seconds. The LED flashes red and blue.
3. Search for Bluetooth devices on your mobile phone as described in your phone's instructions.
4. After a few seconds the phone lists your SMARTH. Select it.
5. If prompted for a PIN or Passkey, enter 0000 (four zeros).
6. The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To pair Bluetooth channel 2 to another Bluetooth device:
1. Enable Bluetooth on the device (such as mobile phone, GPS device, music player).
2. Press for 5 seconds. The LED flashes red and blue.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo SmartH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo SmartH in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo SmartH

Cardo SmartH User Manual - German - 55 pages

Cardo SmartH User Manual - Dutch - 56 pages

Cardo SmartH User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info