480778
5
Zoom out
Zoom in
Previous page
1/12
Next page
3. Pick up one headset and simultaneously press and hold the CTRL
Button and Intercom Button for at least six seconds until the Red
Light beginsashing rapidly, indicating it is in Intercom Pairing mode.
4. Repeat Step 3 again for the second scala rider
TeamSet
pro
headset. Both headsets should now be ashing rapidly in Red.
5. Within a few seconds, both headsets will show a solid Red light
for two seconds, and then begin ashing slowly in Blue.
If the Pairing process is not completed within one
minute the headset will return to Standby mode.

If you have a Bluetooth enabled mobile phone and would like to
make and receive phone calls using the scala rider
TeamSet
pro
,
you must rst pair your headset to the mobile phone.
 If you have a compatible Bluetooth GPS device you wish to
use with the scala rider
TeamSet
pro
, please skip this step, and
continue ahead to BLUETOOTH
Pairing is a one time process. Once the headset is paired to a specic
mobile phone during this Setup Procedure, they will remain paired
and automatically recognize each other whenever they are within
range. If the connection between the phone and headset is lost, tap
the CTRL button to reconnect the devices.
To pair the scala rider
TeamSet
pro
to a Bluetooth phone proceed as
follows:
1. Turn on your phone and make sure its Bluetooth function is
activated.
2. With the scala rider
TeamSet
pro
headset turned ON, press
and hold the CTRL Button for at least six seconds until the Red
and Blue Lights begin rapidly alternating.
3. Search for Bluetooth devices on your phone by following the
phone’s instructions. Please consult your phone’s User Manual
for more information.
4. After a few seconds the phone will list the “scala rider
 as a discovered device. Select it and follow your
phone’s instructions to accept the pairing.
5. When prompted enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will conrm that pairing has succeeded and the
headset will begin ashing slowly in Blue.
If the Pairing process is not completed within two minutes the
headset will return to Standby mode.
With some mobile phones, you may need to tap the CTRL button
to connect the headset to the phone after pairing is complete. The
scala rider
TeamSet
pro
headset will automatically connect to the
last phone connected to the headset.
BLUETOOTH
If you have a Bluetooth enabled GPS device and would like to transmit
navigation instructions and sounds from the GPS device through the
headset’s speakers, you mustrst pair your headset to the GPS device.
NOTE: Not all Bluetooth enabled GPS devices allow connections to
Bluetooth headsets like the scala rider
TeamSet
pro
. Please consult
your GPS device’s User Manual for more information.
To pair the scala rider
TeamSet
pro
to a Bluetooth GPS device
proceed as follows
1. Turn on your GPS device. Make sure Blutetooth mode is activated.
2. With the scala rider
TeamSet
pro
headset turned ON, press
and hold the CTRL Button for at least six seconds until the Red
and Blue Lights begin rapidly alternating.
3. Search for Bluetooth headsets on your GPS device by following
the device’s instructions. Please consult your GPS device’s User
Manual for more information.
English
5
scala rider
®
TeamSet
PRO
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider Teamset Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider Teamset Pro in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider Teamset Pro

Cardo Scala rider Teamset Pro User Manual - German - 12 pages

Cardo Scala rider Teamset Pro User Manual - Dutch - 12 pages

Cardo Scala rider Teamset Pro User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info