667724
7
Zoom out
Zoom in
Previous page
1/14
Next page
4.3 AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play simultaneously, your
scala rider automatically determines which audio source to play
through the speakers based on the priority of the connected devices.
Higher Priority
1. Mobile Phone audio or GPS instructions*
2. Intercom / Click-to-Link
3. A2DP (Stereo Bluetooth) audio
4. FM Radio (Built-in)
5. AUX (for corded connection i.e. Music Players)
* GPS instructions from Smartphone GPS Apps
are prioritized like A2DP audio
Lower Priority
Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
Intercom and Click-to-Link calls have the same priority. So
Click-to-Link calls will not interrupt any Intercom call in progress,
and vice-versa.
A2DP audio priority can be congured to be higher than Intercom audio
priority (see section 3).
4.4 VOICE CONNECT VOX SETTINGS
The scala rider oers VOX technology for safe and hands-free
operation of some key functions.
VOX Activation Speak any word loudly into the microphone
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
VOX Sensitivity
(Default:
Medium)
See section 3 to adjust settings.
High: Use this setting if it is dicult to activate VOX
Low: Use this setting if it is too easy to activate VOX
Enable/Disable
VOX (For
Intercom/Voice
Command only)
In Standby, press and simultaneously for 2 seconds
• Enable: Blue ash for 2 seconds
• Disable: Red ash for 2 seconds
5. INTERCOM
The scala rider Q3 allows Bike-to-Bike full duplex intercom
communication at a range of up to 1 km / 3,200 ft (subject to
terrain) within line of sight. The Q3 is capable of toggling with
three other riders using Intercom Channels A, B and C.
Pairing with another scala rider
To chat with another scala rider via Intercom, pair your scala rider Q3
to the second device. Pairing is a one-time process. Once paired, the
two units will automatically recognize each other whenever in range.
5.1 INTERCOM COMPATIBILITY
Your scala rider Q3 is compatible with most scala rider models
for intercom calls. In addition, it is also compatible with the
Schuberth SRC-System. Intercom range with other models is
limited to the distance of the device with the shorter range.
For details on how to pair and use your Q3 with other scala rider
models, please visit www.cardosystems.com/Q3compatibility.
5.2 PAIRING INTERCOM CHANNELS
Pairing a Channel will replace any existing paired device on that Channel
with the new device.
If you have purchased the Q3 MultiSet, the retail package contains two
pre-paired units congured to communicate via their
v
buttons on
Channel A.
If for any reason you have to pair them again, OR if you wish to pair
another unit, proceed as follows:
1. Check both scala riders are in Standby.
2. On the rst unit, press
v
for 5 seconds. Once the LED begins
ashing, select the intercom channel you would like to pair by
tapping
v
(Channel “A” pairs automatically).
6
| scala rider
®
Q3 / Q3 MultiSet™
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala Rider Q3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala Rider Q3 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala Rider Q3

Cardo Scala Rider Q3 User Manual - German - 16 pages

Cardo Scala Rider Q3 User Manual - Dutch - 16 pages

Cardo Scala Rider Q3 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info