667725
8
Zoom out
Zoom in
Previous page
1/14
Next page
CHANNEL ACTION LED INDICATORS
A” (Default) No action required Rapid RED ashing
B
Tap
v
x2
Rapid BLUE ashing
C
Tap
v
x3
Rapid PURPLE ashing
3. Immediately repeat Step 2 on the second unit. Both units will
now be in Intercom Pairing mode.
4. After a few seconds, both units will show a solid light for
2 seconds, indicating that they are paired and ready to use.
If Pairing is not completed within two minutes, the units will return to
Standby mode.
5.3 MAKING INTERCOM CALLS
Call Channel A
Tap
v
once
Call Channel B
Tap
v
twice
Call Channel C
Tap
v
three times
End Intercom call
Tap
v
Voice Connect (VOX)
Use VOX to make Intercom Calls to your Priority Intercom Channel.
VOX Intercom calls will end automatically after 30 seconds of silence.
Set Priority Channel
(Default: Channel A)
Press
+
for 5 seconds during intercom call
with the selected channel
Call Priority Channel Speak any word loudly into the microphone
VOX and AGC performance will vary based on environmental conditions
including driving speed, helmet type and ambient noise.
For improved performance, minimize the wind impact on the microphone
by using the large microphone sponge and closing the visor.
5.4 RECEIVING INTERCOM CALLS
If another paired unit tries calling you via Intercom, the call will
begin almost instantly
• To receive a CTL intercom call see table in section 5.5
5.5 CLICKTOLINK® INTERCOM
Click-to-Link is the spontaneous, “social” feature of your scala rider
for making intercom calls with other riders nearby without the
need for pairing.
Click-to-Link can be disabled, eectively blocking any attempt by
others to make Click-to-Link calls to you.
Start a CTL call request
(search lasts up to 10 seconds)
In standby, press
W
for 2 seconds
End a CTL call /
Cancel a CTL call request
Tap
v
Accept a CTL call
When hearing the CTL ringtone:
Tap
v
or say any word loudly to answer
by VOX
Reject a CTL call
Remain silent until the CTL ringtone
stops or press
v
for 2 seconds
ENABLE/DISABLE CTL
(Default: ENABLED)
See section 3
If other scala rider users are nearby, your next Click-to-Link call may
randomly connect to any of them.
5.6 BUSY SIGNAL
A busy signal will be heard when attempting to establish an
Intercom call with another device that is already on a phone or
intercom call.
scala rider
®
Q3 / Q3 MultiSet™ |
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala Rider Q3 MultiSet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala Rider Q3 MultiSet in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala Rider Q3 MultiSet

Cardo Scala Rider Q3 MultiSet User Manual - German - 16 pages

Cardo Scala Rider Q3 MultiSet User Manual - Dutch - 16 pages

Cardo Scala Rider Q3 MultiSet User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info