667716
9
Zoom out
Zoom in
Previous page
1/16
Next page
6. PAIRING AND USING A MOBILE PHONE,
GPS DEVICE OR MP3 PLAYER
To connect your scala rider to a Bluetooth device you must rst pair
them. Once paired, they will automatically recognize each other
whenever they are within range (10m / 33ft).
Your scala rider has two Bluetooth channels for connection to
mobile phones, GPS devices and music players with A2DP.
6.1 PAIRING BLUETOOTH CHANNELS 1 AND 2
1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player.
2. Check the scala rider is in Standby.
3. To pair Bluetooth Channel 1 – press
+
for at least 5 seconds
until the RED and BLUE LEDs begin rapidly alternating.
To pair Bluetooth Channel 2 – press
-
for at least 5 seconds
until the RED and BLUE LEDs begin rapidly alternating.
To pair a GPS, when LEDs begin rapidly alternating, tap .
4. Search for Bluetooth devices on your phone/GPS/MP3 player by
following the device’s instructions.
5. After a few seconds the device will list “scala rider Q1 . Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The device will conrm that pairing has succeeded and the LED
will begin ashing slowly in BLUE.
8. If Pairing is not completed within 2 minutes, the scala rider will
return to Standby.
If you have paired 2 dierent mobile phones directly to your scala rider ,
you will need to set one as default for making calls.
If your GPS supports it, you can pair the second mobile phone directly
to the GPS and then pair the GPS to your scala rider, and so connect
both mobile phones and the GPS to your scala rider.
Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music
(A2DP), even if the phone has an MP3 player function. Consult your
mobile phone’s User Manual for more information.
Not all Bluetooth GPS devices allow connection to Bluetooth audio
devices. Consult your GPS User Manual for more information.
After pairing, you may need to tap
W
to connect the scala rider .
6.2 MAKING AND RECEIVING PHONE CALLS
Answer a call
Tap
W
or say any word loudly to answer by VOX
Reject a call Remain silent for 15 seconds, or press and hold
W
for 2 seconds
End a call
Tap
W
Voice Dial*
(if supported by
mobile phone)
Tap
W
and
v
simultaneously and follow the
prompt from the mobile
Redial*
Press
W
and
v
for 2 seconds
Hot-Dial
Tap
W
three times
Set default phone
When on a phone call, press
+
for 5 seconds
Toggle default
phone
In Standby, press
W
for 5 seconds
*This feature is not available during mobile calls
To use the Hot-Dial, rst congure the number (see section 3).
If you have 2 mobile phones paired directly to your scala rider, you will need to set
one of them to use as default for outgoing calls.
scala rider
®
Q1 / Q1 TeamSet™ |
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala Rider Q1 Teamset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala Rider Q1 Teamset in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala Rider Q1 Teamset

Cardo Scala Rider Q1 Teamset User Manual - German - 16 pages

Cardo Scala Rider Q1 Teamset User Manual - Dutch - 16 pages

Cardo Scala Rider Q1 Teamset User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info