667732
8
Zoom out
Zoom in
Previous page
1/34
Next page
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
If you have paired two different mobile phones directly to your FREECOM 2, set one as default for making
calls (see Setting the Default Mobile Phone on page 21).
Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP), even if the phone has an MP3
player function. Consult your mobile phone’s user manual for more information.
Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User Manual for
more information.
To cancel the pairing process:
Press for 2 seconds. The LED stops flashing red and blue or red and green.
To reset all Bluetooth device pairing:
Press and for 5 seconds.
In all battery states, the LED flashes purple slowly five times, confirming that pairing has been reset.
Resetting all Bluetooth device pairing also resets all Bluetooth intercom pairing.
3.5.2 PAIRING THROUGH THE VOICE-ASSISTED MENU
To pair your FREECOM 2 with devices through the voice-assisted menu:
1. Tap and .
2. When the voice-assisted menu reaches "Advanced Features", tap or use VOX.
3. When the voice-assisted menu reaches the required option, tap or use VOX.
To reset all Bluetooth pairing, select the menu option "Reset Mobiles and GPS Pairing".
3.6 PAIRING THE BLUETOOTH INTERCOM
The FREECOM 2 allows full-duplex Bluetooth intercom communication for chatting with another rider on Cardo or
non-Cardo units.
To connect your unit to another unit with a Bluetooth intercom, you must first pair their channels.
Pairing a channel replaces any existing paired unit on that channel with the new unit.
If you have purchased the FREECOM 2 MultiSet, the retail package contains two pre-paired units.
Your FREECOM 2 is compatible with most Cardo models for Bluetooth intercom calls. In addition, it is also
compatible with the Schuberth SRC-System™.
For details on how to pair and use your FREECOM 2 with other Cardo units, go to
www.cardosystems.com/freecomcompatibility.
3.6.1 PAIRING THE BLUETOOTH INTERCOM TO OTHER CARDO UNITS
To pair your Unit with Cardo units through the unit buttons:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. On your unit, press for 5 seconds. The LED flashes red.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala Rider Freecom 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala Rider Freecom 2 in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala Rider Freecom 2

Cardo Scala Rider Freecom 2 User Manual - German - 36 pages

Cardo Scala Rider Freecom 2 User Manual - Dutch - 36 pages

Cardo Scala Rider Freecom 2 User Manual - French - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info