737736
31
Zoom out
Zoom in
Previous page
1/56
Next page
Technical and optical modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
25
XRICSE CARE - Operation
5 Input eld Minimum speed
Shows the minimum speed which must be main-
tained, the test ends automatically if the speed falls
below this value
6 Input eld Maximum load Shows the highest load value
5.7 Trainings
The therapist must define a maximum load limit which is matched to the patient. Exercising
below this limit must not endanger the patient. Exercising above this limit is prohibited.
The therapist must let the patient know about his/her personal perceived exertion (e.g. Borg
scale) and encourage him/her to stop the training in case of subjective unpleasant
sensations.
The values displayed by the XRCISE CARE software are provided as guidance and don‘t
replace the individual and direct monitoring of the patient. In order to ensure that the displayed
values are correct, they must be double-checked by an independent measurement method.
In this menu you can:
Search for existing trainings
Edit training data
Create a new training profile for a patient
Select a training for a patient
The following training types can be selected:
Ergometer training
Treadmill training
Free training
The following fundamental control methods for training with equipment are distinguished.
Pulse controlled training: During the training, the load produced by the exercise equipment
is automatically regulated until the patient has reached their preset maximum heart rate.
Load controlled training: During the training, the load produced by the exercise equipment
is automatically increased until the specified maximum load has been reached.
Intervall training: Only for the ergometer. During interval training, very short load phases
alternate with short recovery phases.
CAUTION!
The load applied by the exercise equipment must be set according to the
patient‘s state of health and condition and must not be too high under any
circumstances. Both incorrectly performed exercises and excessive stress
due to the tests can be harmful to health.
You can also change a value during the training process. The last specified
value is automatically assumed and saved for the patient after the end of the
training. When this training is opened again, the patient starts with the last
specified values.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardiowise XRCISE Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardiowise XRCISE Care in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardiowise XRCISE Care

Cardiowise XRCISE Care User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info