Manual Carat W-5421 (page 24 of 44) (English, German, Dutch, Danish, French)

816473

Zoom out

Zoom in

1/44

24 NH2MAN09

21-01-2011

MAIN PARTS

The main parts are numbered identical to the graphics of

the power tool at page 4 of this manual.

1. Grasping surface

2. Water (Connector and tap)

3. ON/OFF Switch

4. Handle

5. Motor (See specif cations below)

6. Auxiliary handle

7. Locking knob

8. Slidingbase brake

9. Pivot axes

10. Handle (Transport)

11. Rails

12. Waterlevels (Horizontal and vertical)

13. Endblocker

14. Anchor bolt

15. Spacer

16. PRCD

17. Depth Limit

18. Locking Knob depth Limit

19. Thermal protection

MOTOR SPECIFICATIONS

Type W5421

Rated power input 2200W

Protection class I

No-load speed 2700 rpm

Width across f ats locking bolt 17mm

Arbor diameter Ø30 mm

Maximum diameter diamond cut-off wheel 540 mm

Weight 12 kg

INTENDED USE

The transportable electric tool is intended to grind with dia-

mond cut-off wheels in mineral materials such as reinfor-

ced concrete, brickwork and road surfaces.

The rails are intended to guide the motor . The transporta-

ble electric tool must be used in combination with water.

POWER SUPPLY

The tool should be connected only to a power supply of the

same voltage as indicated on the nameplate, and can only

be operated on single-phase AC supply. This is a class I

tool and can therefore only be used from grounded soc-

kets.

ENVIRONMENTAL PROTECTION

Do not dispose of electric tools together

with household waste material! In obser-

vance of European Directive 2002/96/EC

on waste electrical an electronic equip-

ment and its implementation in accordan-

ce with national law , electric tools that have reached the

end of their life must be collected separately and returned

to an environmentally compatible recycling facility.

WORKING PROCES

An important part of the workings proces is the handling of

the residu. Support the residu with the use of suited means

like straps. Don’t let the residu suprise you when it comes

off.Pay more attention when grinding the ceilling.

WARNING! Under no circumstances may

the design of the machine be modi f ed wit-

hout the permission of the manufacturer .

Always use genuine accessories. Non-aut-

horized modi f cations and/or accessories

can result in serious personal injury or the death of the

operator or others.

f) Do not “jam” the cut-off wheel or apply excessive

pressure. Do not attempt to make an excessive depth

of cut. Overstressing the wheel increases the loading and

susceptibility to twisting or binding of the wheel in the cut

and the possibility of kickback or wheel breakage.

g) When wheel is binding or when interrupting a cut

for any reason, switch off the power tool and hold

the power tool motionless until the wheel comes to

a complete stop. Never attempt to remove the cut-

off wheel from the cut while the wheel is in motion,

otherwise kickback may occur. Investigate and take

corrective action to eliminate the cause of wheel binding.

h) Do not restart the cutting operation in the workpiece.

Let the wheel reach full speed and carefully reenter the

cut. The wheel may bind, walk up or kickback if the power

tool is restarted in the workpiece.

i) Support panels or any oversized workpiece to

minimize the risk of wheel pinching and kickback.

Large workpieces tend to sag under their own weight.

Supports must be placed under the workpiece near the

line of cut and near the edge of the workpiece on both

sides of the wheel.

j) Use extra caution when making a “pocket cut” into

existing walls or other blind areas. The protruding wheel

may cut gas or water pipes, electrical wiring or objects that

can cause kickback.

ADDITIONAL SAFETY WARNINGS

a) Use suitable detectors to determine if utility lines

are hidden in the work area or call the local utility

company for assistance. Contact with electric lines can

lead to ﬁ re and electric shock. Damaging a gas line can

lead to explosion. Penetrating a water line causes property

damage or may cause an electric shock.

b) When working stone, use dust extraction. The

vacuum cleaner must be approved for the extraction

of stone dust. Using this equipment reduces dust-related

hazards.

c) When working with the machine, always hold it ﬁ rmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

d) Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than

by hand.

e) Never use the machine with a damaged cable. Do

not touch the damaged cable and pull the mains plug

when the cable is damaged while working. Damaged

cables increase the risk of an electric shock.

The power cord of the W5421 is equipped with a PRCD

switch which protects the operator against electrocution.

After connecting the mains plug with the outlet, the PRCD

should be started by pressing the (green) RESET button.

Always check the PRCD by pressing the TEST button

before use. Never use the W5421 without a properly

functioning PRCD. Never replace the standard plug with

another type of plug.

ENGLISCH – ORIGINAL INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat W-5421 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 11.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat W-5421 Manual

Product: