816489
5
Zoom out
Zoom in
Previous page
1/33
Next page
RVZ-500 Operation manual
page 5 03/2021
1.1.4. Operation of the machine
Before starting:
1. Check the machine thoroughly, repair all
failures before starting the engine. If the
failures cannot be repaired at the jobsite, do
not operate the machine.
2. Check the fuel system for leaking. Dripping
fuel poses fire hazard.
Starting and operation:
3. When starting the engine, take stable
position and held the grip firmly.
4. The controls must be in good order.
5. The operator must not leave from his
position when the engine is running.
6. Stop the engine before interrupting the work.
When parking the machine, secure it from
falling.
7. Stop the engine before refueling. Avoid
contact between fuel and hot parts of the
engine. Let the engine to cool down first.
8. Keep the fuel tank tightly closed. Close the
fuel tap when not in operation. Drain the fuel
before transporting the machine for longer
distances.
DANGER! Leaking fuel tank and distribution
may cause explosion. Replace these parts
immediately if damaged.
Jobsite:
9. No bystanders are allowed within the
operational range of the machine. Especially
children should be kept in safe distance.
10. Do not operate the machine in areas with
explosion danger.
11. If operated in closed spaces (halls, tunnels),
there should be ensured sufficient
ventilation.
12. Held and guide the machine with high care
in order to avoid hands injury caused with
contact with an obstacle.
14. Do not smoke, do not use naked flame. Do
not work close to flammables or in explosion
danger areas.
15. Avoid touching hot parts. The exhaust
silencer and other parts of the engine are
very hot during operation and touching them
can cause serious burns.
1.1.5. Maintenance and Service
1. Do not remove any covers or other safety
devices. In case this must be done because of
service, install all the parts back before
starting.
2. Use genuine spare parts only. Do not carry
out any modifications without prior written
approval of the manufacturer.
3. Stop the engine before servicing the
machine.
1.1.6. Transport and Storage
1. When loading and transporting the machine
fasten the machine properly on the carrier.
2. The machine is to be transported in upright
position (with engine upwards). This
position is also suitable for storing.
3. Prior to long-term storage: Conserve the
machine, cover it and store it at safe, dry and
ventilated place.
1.1.7. Testing
It is recommended to test the machine by
authorized service at least once a year or more
often if used under heavy conditions.
If necessary, carry out repairs of all possible
failures.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat VZ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat VZ-500 in the language / languages: English as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info