Manual Carat SL-1255 DUSTEC (page 39 of 98) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian)

816481

Zoom out

Zoom in

1/98

accumulated dust. (If operating in especially dusty conditions, perform this operation more often.)

KEEP TOOL CLEAN

All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could

possibly dissolve or otherwise damage the material. Wear safety glasses while using compressed air.

THE CARBON BRUSHES

The carbon brushes are a normal wearing part and must be replaced when

they reach their wear limit.

Replace the brushes if they are worn to 6mm or less.

To replace:

Unplug the machine, press the limit pin to open the base, and remove the screw to release each brush cap. To

make changing the bottom brush easier, one may remove the 3 screws to temporarily remove the base.

Pull back on the carbon brush springs to release the tension. Unscrew the

screw holding the carbon brush lead. Then pull out the brush.

Repeat for the other side. To reassemble reverse the procedure.

NOTE: To reinstall the same brushes, first make sure the brushes go

back in the way they came out. Otherwise a break-in period will occur

that will reduce motor performance and increase brush wear.

Caution: Always replace the brushes as a pair.

If the replacement of the power supply cord is necessary, this has to be done by the manufacturer or

their agent in order to avoid a safety hazard.

WARNING: All repairs must be entrusted to an authorized service center. Incorrectly performed repairs

could lead to injury or death.

Screws retaining the base

1/4"(6mm)

Carbon Brush

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1255 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat SL-1255 DUSTEC Manual

Product: