816481

Carat SL-1255 DUSTEC Manual

36
Zoom out
Zoom in
Previous page
1/98
Next page
36
GB
CARTON CONTENTS
1. Wall Chaser Machine
2. Spacers Set: 15mm, 10mm, 6mm
3. Side Handle
INSTALLING THE DIAMOND BLADES AND ADJUSTING THE GROOVE WIDTH
INSTALLING THE BLADES
NOTE: If the Tool-Free Arbor Screw cannot be removed because the arbor just turns together with the
screw (freewheeling), hold the rim of the Tool-Free Arbor Screw while loosening. This will allow it to be
loosened.
1. Unplug the machine and push the limit pin to release the base and
allow it swing down and out of the way.
2. Place the inner blade in position directly on the arbor making sure
the direction of rotation arrow of the blade and the arrow on the
machine are in the same direction.
3. Place as many spacers as necessary to achieve the desired groove
width. They are in sizes 15, 10, and 6 mm.
4. Place the outer blade in position.
5. Place all of the remaining spacers from the spacer set on top of the
outer blade (so that the arbor may be tightened).
6. Place the tool-free arbor screw in position.
7. Flip up the tab on the arbor screw and screw it in tightly. It may be
helpful to wear gloves and grab the blade to immobilize it while
tightening the arbor screw. Once tight, flip the tab back down.
8. When closing the base, ensure that the spring is properly
positioned in its socket in the base, then press the limit pin to allow
the base to close.
NOTE: Use blades that have an arbor bore which can fit, and that are
rated for the machine’s maximum rated speed or higher.
REMOVING THE BLADE
Removal is the opposite of installing the blade.
TO ADJUST THE DEPTH OF CUT
Turn the depth adjustor wheel to the desired depth of cut. Note that
the actual depth of cut will decrease slightly as the diamond blades
wear.
Spacers
Outer Blade
Inner Blade
Depth Adjustor
1. Hold the Rim
2. Turn the Tool-Free Arbor Screw
If the Tool-Free Arbor Screw is
freewheeling:
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1255 DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1255 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info