Manual Carat RS-3300 (page 35 of 104) (English, German, Dutch, Danish, French, Swedish, Norwegian)

816477

Zoom out

Zoom in

1/104

Cut-o machine safety warnings

• The guard provided with the tool must be securely attached to the power tool and positioned for

maximum safety, so the least amount of wheel is exposed towards the operator. Position yourself

and bystanders away from the plane of the rotating wheel. The guard helps to protect operator from

broken wheel fragments and accidental contact with wheel.

• Use only diamond cut-o wheels for your power tool. Just because an accessory can be attached to

your power tool, it does not assure safe operation.

• The rated speed of the accessory must be at least equal to the maximum speed marked on the

power tool. Accessories running faster than their rated speed can break and y apart.

• Wheels must be used only for recommended applications. For example: do not grind with the side

of cut-o wheel. Abrasive cut-o wheels are intended for peripheral grinding, side forces applied to

these wheels may cause them to shatter.

• Always use undamaged wheel anges that are of correct diameter for your selected wheel. Proper

wheel anges support the wheel thus reducing the possibility of wheel breakage.

• Do not use worn down reinforced wheels from larger power tools. Wheels intended for larger power

tools are not suitable for the higher speed of a smaller tool and may burst.

• The outside diameter and the thickness of your accessory must be within the capacity rating of

your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.

• The arbour size of wheels and anges must properly t the spindle of the power tool. Wheels and

anges with arbour holes that do not match the mounting hardware of the power tool will run out of

balance, vibrate excessively and may cause loss of control.

• Do not use damaged wheels. Before each use, inspect the wheels for chips and cracks. If power

Symbols used in this manual

V…….........volts

A…….........amperes

Hz…….......hertz

W……........watt

~………....alternating current

………...rated speed

min-1….......revolutions or reciprocation

per minute

1∅.............Single Phase Current

.…with electrical earth

.........warning of general danger

.......read these instructions

......always wear eye protection

......always wear a dust mask

.....always wear hearing protection

.....wear safety-approved hard hat

.....DANGER! Keep hands away from cutting area

and the blade.

do not dispose of electric tools, accessories and

packaging together with household waste

material

.....Always use with water cooling

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat RS-3300 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 2.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat RS-3300 Manual

Product: