816454

Carat CARACOUP 120 ALU Manual

10
Zoom out
Zoom in
Previous page
1/47
Next page
19
ENGLISH
18
an d'arrêter la machine.
7. ENTRETIEN ET NETTOYAGE
Avant de réaliser toute opération d'entretien, vériez que
la machine est débranchée de l'alimentation électrique.
An de garantir la qualité de la machine sur le long terme,
les opérations d'entretien suivantes doivent être réalisées
après chaque utilisation de la machine :
- Inspectez visuellement l'ensemble de la machine.
- Nettoyez la bride et la xation de la lame.
- Nettoyez le moteur (boîtier + ventilateur), le réservoir
d'eau, la pompe à eau, le ltre de la pompe à eau, les
tuyaux et les buses, les rails de guidage et les roulettes de
la table.
- Assurez-vous que tous les boulons et les vis sont bien
serrés.
- Avant d'utiliser la machine, vériez que toutes les
vérications mentionnées ci-dessus ont été eectuées.
een korte rustpauze.
8. ÉLIMINATION
Si aucun accord de retour ou d'élimination n'a été conclu,
veuillez envoyer en recyclage les composants démontés
suivants :
- Pièces de ferraille.
- Pièces en plastique.
- Jetez les autres composants triés en fonction des
caractéristiques des matériaux.
Information à l'intention des pays membres de
l'UE. Les déchets électriques sont recyclables et
ne doivent pas être jetés avec les ordures ménagères !!
Conformément à la directive européenne 2012/19/UE
relative aux déchets électriques et électroniques et à leur
adoption par les diérentes lois nationales, les outils
électriques usés doivent être collectés séparément et
recyclés dans le respect de l'environnement.sadf
1. GENERAL
1.1 Operating manual
This operating manual provides guidance on safe and
eicient operation and should form a basis of any actions
involving the machine. It is an integral part of the machine,
which should be kept in the immediate vicinity accessible
for its operating personnel. Prerequisite of safe operation
is adherence to all safety and handling instructions.
Therefore, before starting any work, the personnel must
read carefully and understand the operating manual.
Moreover, the accident prevention regulations applicable
at the site of the machine operation and general safety
regulations must be complied with.
1.2 Explanation of symbols
Warnings and safety instructions
Warnings and safety instructions in the manual are
identied with the pictograms and provided in blocks
highlighted in grey.
DANGER
... draws attention to an immediate danger that, if
not avoided, may result in heavy or even fatal injuries.
ATTENTION!
... draws attention to potentially dangerous situa-
tions that, if not avoided, may result in material damage.
… marks danger due to electric current.
Failure to observe the safety instructions leads to
danger of heavy or fatal injuries.
… marks danger of crushing.
Failure to observe the safety instructions leads to
danger of heavy injuries from moving parts.
… marks danger due to hot surface.
Failure to observe the safety instructions leads to
danger of burns and heavy skin injuries caused by heat.
… marks danger from moving diamond blades.
Failure to observe the safety instructions leads to
danger of cuts and heavy skin injuries caused by rotating
diamond blades.
1.3 Liability limitation
All data and instructions provided in this manual were
compiled with consideration of applicable standards
and regulations, state of the art in this eld and our
long-standing insights and experience.
The manufacturer accepts no liability for damages
caused by:
- Non-observance of the Operating manual.
- Unintended use.
- Employment of unskilled and uninstructed personnel.
- Unauthorized conversions.
- Technical changes.
- Use of non-approved spare parts.
The responsibilities agreed in the delivery contract, the
General Terms and Conditions as well as the delivery
conditions of the manufacturer and the statutory
regulations valid at the time of the conclusion of the
contract shall apply.
Warranty
The manufacturer guarantees the functional capability
of the applied process technology and performance
parameters identied. The warranty period commences
with the defect-free delivery.
Warranty conditions
12 months aer delivery of mechanical and electrical
components for one-shi operation, except for the wear
parts and tools.
The warranty claim expires, if the system was not installed
and started up by our experts.
The warranty extends to the replacement parts. Conse-
quential damages are excluded.
Damage caused by natural wear, decient of improper
maintenance, failure to comply with the operating regula-
tions, excessive loads and use of inappropriate equipment
shall be excluded from the warranty.
2. SAFETY
2.1 Intended use
The CARACOUP 100 ALU and CARACOUP 120 ALU tile
cutting machine is designed exclusively for the following
purposes in the commercial sector: is designed for wet
cutting of the solid construction materials such as: Tile,
ceramic and marble.
- Any claims for damages resulting from unintended use
are excluded.
- The operator alone is responsible for all damages due to
unintended use.
2.2 Rationally foreseeable misuse
Any use of the machine going beyond the intended one,
shall be deemed unintended and thus prohibited.
This also applies to:
- Cutting any materials other than presented.
- Cutting without or with open diamond blade guard.
- Cutting without water.
- Removal of clippings in pendulum cutting procedure
(vertical plunging into chippings from above).
2.3 Responsibilities of the operator
Operator
An operator is every natural or legal person, who uses the
machine or delegates its use to others and is responsible
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat CARACOUP 120 ALU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat CARACOUP 120 ALU in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info