816452
85
Zoom out
Zoom in
Previous page
1/92
Next page
85
Error message / error Possible cause Troubleshooting Personnel
High segment wear! Segment bonding is
too so
Use cutting wheels with
harder seg ments or reduce
feeding pressure
Operating personnel
Segments are too thin
in relation to the mo tor
capacity and feeding
pressure
Reduce the feeding
pressure , or use cutting
wheels with thicker
segments
Segment number is too
small
Use cutting wheels with seg-
ments, or reduce the feeding
pressure
The cutting wheel runs
out
Use a new cutting
wheel , have the old one
straightened , check the
cutting sha , use a new one
if necessary
The cutting wheel
deviates
Check the table guides,
replace if necessary
Abrasive aggregates Use cutting wheels with
harder seg ments
Feeding pressure is too
high
Reduce the feeding pressure
Cutting blade shows side
and radial run-out
Cutting blade is bent or
damaged
Have the cutting blade
straightened, solder the
segments to a new blade or
use a new blade
Manufacturer
Flange is polluted or
damaged
Clean or replace the ange Operating personnel
Motor sha is
bent
Replace the electric motor Qualied electricians
Zero performance when
cutting, cutting blade is
blunt
The cutting blade does
not match the material
Use a proper cutting blade Operating personnel
The cutting blade does
not match the machine
capacity
The cutting blade is too
hard
Diamond on the segment
are blunt
sharpen Specialist personnel
Suboptimal blade course Blunt segments sharpen Specialist personnel
Cutting blade is
overloaded
Use an appropriate cutting
blade
Operating personnel
Poor tension of cutting
blade
Return the cutting blade Manufacturer
Mounting bore of the
cutting blade is worn out
The cutting blade rotates
on the motor sha
Check the mounting ange,
replace if necessary
Manufacturer
The mounting bore must
be hollowed out and a ring
tted in
Specialist personnel
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat CARACOUP 104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat CARACOUP 104 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info