777746
22
Zoom out
Zoom in
Previous page
1/43
Next page
22
Assembly Step 5 (Fig S. 20 & 21)
1. Assembly of the Upper Cable (32)
AInsert the Single Pulley Block (15) into the Bushing (42), then attach the Axle Collar (49) tto the Single Pulley Block (15) using
one M6X6mm Screw (50).
BRun the end of Upper Cable (32) through the Bending Column (8) and the Single Pulley Block (15).
CAttach the Bushing (42) to the Bending Column (8), using one M8X15mm Hex Bolt (61) and one M8 Arc Washer (65).
DInstall Pulley NO.1 (31) to the Single Pulley Block (15), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10 Nylon
Nut (66).
EAttach the Steel Bushing (17) to the Single Pulley Block (15), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and
one M10 Nylon Nut (66).
FAttach the Cable U (18) to the ball end of the Upper Cable (32).
GInstall Pulley NO.2 (30) to the Bending Column (8), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10
Nylon Nut (66).
HInstall Pulley NO.3 (30) to the Upper Connect Frame (9), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one
M10 Nylon Nut (66).
iInstall Pulley NO.4 (30) to two Pulley Patches (16), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10
Nylon Nut (66).
JInstall Pulley NO.5&6 (30) to the Upper Cross Beam (10), using two M10X40mm Hex Bolts (56), four M10 Washers (63) and two
M10 Nylon Nuts (66).
KAttach the Pulley U (20) to the Selector Shaft (6) with the Plastic Washer (26). (NOTE: M12X80mm Hex Bolt (51) and M12 Nut
(52) have been Pre-assembled to the Pulley U (20).)
LInstall Pulley NO.7 (30) to the Pulley U (20), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10 Nylon
Nut (66).
MInstall Pulley NO.8&9 (30) to the Upper Cross Beam (10), using two M10X40mm Hex Bolts (56), four M10 Washers (63) and two
M10 Nylon Nuts (66).
NInstall Pulley NO.10 (30) to two Pulley Patches (16), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10 Nylon
Nut (66).
OInstall Pulley NO.11 (30) to the Upper Connect Frame (9), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10
Nylon Nut (66).
PInstall Pulley NO.12 (30) to the Bending Column (8), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10 Nylon
Nut (66).
QInsert the Single Pulley Block (15) into the Bushing (42), then attach the Axle Collar (49) to the Single Pulley Block (15) using one
M6X6mm Screw (50).
RRun the other end of Upper Cable (32) through the Bending Column (8) and the Single Pulley Block (15).
SAttach the Bushing (42) to the Bending Column (8), using one M8X15mm Hex Bolt (61 and one M8 Arc Washer (65).
TInstall Pulley NO.13 (31) to the Single Pulley Block (15), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one M10
Nylon Nut (66).
UAttach the Steel Bushing (17) to the Single Pulley Block (15), using one M10X40mm Hex Bolt (56), two M10 Washers (63) and one
M10 Nylon Nut (66).
VAttach the Cable U (18) to the ball end of the Upper Cable (32).
WAttach two Strap Handles (Short) (40) the Cable U (18), using two M10X35mm Hex Bolts (57), four M10 Washers (63), two M10
Nylon Nuts (66) and two Pothooks (37).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Capital Sports 10029412 Puissantor B15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Capital Sports 10029412 Puissantor B15 in the language / languages: English, German as an attachment in your email.

The manual is 7.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info