154118
7
Zoom out
Zoom in
Previous page
1/29
Next page
7
Connectivity
Besides working as a portable digital multimedia player, Canyon CNR-MPV4A also works as a
removable USB storage device (MSC mode), or MTP device (MTP mode with DRM function). Please
follow instructions below on how to store/extract data from the device.
To switch between MSC and MTP modes:
z Connect the device to host computer with USB cable
provided.
z After the device finished loading process, press and hold
button to switch between MSC and MTP modes.
Note:
The mode switch can also be done while the device is
disconnected from host computer. Please refer to Settings
section for more information.
MSC mode - Removable USB storage device:
1. Connect the host PC USB port and the device USB port with the USB cable provided.
2. A new system drive will be displayed under “My Computer” momentarily.
3. The drive works as any other USB storage device. Files and folders can be created/edited in
the drive.
4. To remove the device from host computer, simply right click on the safe removal icon from
system notification area and select “Safely remove hardware” option.
5. Highlight the device and click on “Stop” button. The device can be safely unplugged after
system notification.
Note:
z Before removing the USB device, make sure to end all applications running on the device. Do
NOT remove the USB device at this moment. Violation may cause data loss or even damages
to the device
z If you do not follow the safe removal procedures on Windows ME, Windows 2000 and
Windows XP operating systems, data loss and/or damage to the device may occur due to
“write cache” issue.
Note:
Windows 98 SE does not support default mass storage driver. Please follow the instructions below
to install the driver.
z Turn on the computer.
z Connect device to the USB port of the computer using USB cable provided in the package.
z Place the driver CD enclosed in the package into the CD ROM drive of the computer.
z Windows 98 SE will automatically detect the newly connected device and a dialog box “Add
New Hardware” will pop up. Please follow the step-by-step instructions to properly install the
driver.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canyon cnr mpv4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canyon cnr mpv4 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info