562773
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
ENG
14 Setup Mode (applies to modules M-R and L-R)
FRA
14 Sortie high level (valable pour Module M-R et L-R)
ESP
14 Modo Setup (aplicable a los módulos M-R y L-R)
ITA
14 Setup mode (vale per i moduli M-R e L-R)
RUS
14

SWE
14 Setup Mode (gäller för modul M-R och L-R)
NED
14 Setup Mode (geldt voor module M-R en L-R)
POL
14
Setup Mode (dotyczy modułu M-R i L-R)
Amplifier mode has two optional operating modes
Sub woofer modules S, M and L:
“Amplier Mode” on “AUTO”:
Subwoofer switches on automatically when it
receives a music signal; when the music stops the
subwoofer automatically goes
into standby mode after 5 to 15 minutes.
“Amplier Mode” on “ON”:
Subwoofer stays switched on permanently
Room Compensation – Adjustments on initial
installation (Modules M and L)
Select the switch setting that gives the best quality
reproduction so that the subwoofer performs at
the optimal level for the acoustic properties of the
room. The following basic rules apply: set it to
“Normal” for regular sized rooms; set it to “Wide”
for large rooms; set it to “Narrow” for small rooms.
(Modules M-R / L-R) “Boost” setting for a richer
musical sound at low and medium volume.
Remote Control
To activate the Setup mode press and hold the
“Setup” button for 2 seconds. Press the “Setup”
button again to return from remote operation to
normal mode. When the subwoofer is turned off
the most recently activated mode will be stored.
ENG
Operation
FRA
Utilisation
Mode d‘amplification pour choisir entre
deux types de fonctionnement Modules
subwoofer S, M et L:
AMPLIFIER MODE sur AUTO:
Le subwoofer est automatiquement mis
en circuit à la réception du signal musi-
cal; si la musique s‘arrête, le subwoofer
se met en mode standby au bout de 5 à
15 minutes.
AMPLIFIER MODE sur ON:
Le subwoofer demeure toujours en
circuit.
Room Compensation – Réglage pour
l‘installation initiale (modules M et L)
Choisissez la position de l‘interrupteur qui
apporte la meilleure restitution du son
afin d‘adapter le subwoofer de manière
optimale aux conditions acoustiques du
local d‘audition. S‘orienter sur le principe
de base suivant: réglage sur NORMAL
pour les locaux de dimensions normales,
réglage sur WIDE pour des locaux de
vastes dimensions, réglage sur NARROW
pour des locaux de dimensions restreintes.
(Module M-R / L-R) Réglage sur „Boost“
pour une sonorité plus pleine à des volu-
mes faibles à moyens.
Télécommande
Appuyer 2 secondes sur la touche „Setup“
pour activer le mode Setup. Appuyer une
nouvelle fois sur la touche „Setup“ pour
remettre la télécommande en mode nor-
mal. Le dernier Setup réglé est mémorisé
lorsque le subwoofer est mis hors circuit.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canton SUB8.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canton SUB8.2 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info