Manual Canton Movie (page 27 of 40) (English, German, Dutch, French, Italian, Polish, Swedish, Spanish)

562778

Zoom out

Zoom in

1/40

Problem Possible cause Solution

Subwoofer

does not turn

1. The power cable is not connected from the socket to the

subwoofer

Check connection

2. The power has not been turned on Switch to “ON”

3. The switch for automatic switching on is not in the “ON”

position or the “AUTO” or “AUTO HIGH” positions

Check switch setting

4. The subwoofer is not connected with the ampliﬁer (re-

ceiver) through its speaker outlet (High Level) or subwoofer

outlet (cinch) cable

Check connection

5. Defective signal line (cinch) Test with another cinch cable and change cable if necessary

6. The volume of the ampliﬁer has been set too low Increase volume level to test

7. With a “Dolby Digital” receiver (amplier): the receiver is

not set for subwoofer operation (operating method “Small”

or “ActiveSub = On”)

Check operating mode

8. The outlet level on the ampliﬁer is set too low for the

subwoofer outlet (cinch outlet)

Increase the outlet level of the ampliﬁer

9. The microfuse in the subwoofer has blown (fused) Get a specialist to change the microfuse

Subwoofer

does not

switch off

1. Switch for automatic switching on (Standby) set to “ON” Switch to “Auto” or “OFF”

2. Constant humming at inlet of subwoofer Use a shorter signal line from the ampliﬁer to the subwoofer or remove any possible sources of

interference (see “Subwoofer hums”)

Subwoofer

hums

1. Signal line from ampliﬁer to subwoofer too long Use shorter signal line

2. Signal line used is not fault-protected or the protection

has been damaged (defective)

Change signal line for a fault-protected line

3. Ground loop (ripple pickup) generated A ground loop can be generated when two or more devices connected via a signal line (cinch)

are plugged into separate sockets (e. g. ampliﬁer and computer). All devices connected to the

ampliﬁer should be plugged into the same multiple socket outlet

4. Another piece of equipment on the same circuit has no

interference suppression (e. g. fridge)

Switch off possible sources of interference to test; unplug the device concerned to see if the

humming noise disappears or connect the source of interference to a different circuit (L1, L2

or L3). (Where necessary take advice from your electrician.) Insert a special “ferrite common

mode lter” (available from specialist retailers) between the amplier and the subwoofer to

eliminate the humming. Disconnect and rotate the mains plug to reduce the so-called ripple

voltage. (Particularly important if the ampliﬁer is not earthed)

ENG

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canton Movie in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canton Movie Manual

Product: