Manual Canton DSS 303 (page 20 of 27) (English, German, French, Spanish)

67571

Zoom out

Zoom in

1/27

Radio hören

Verbinden Sie die mitgelieferte Wurfantenne mit dem Antennen-

anschluss auf der Rückseite des DSS 303 und richten diese aus.

Alternativ können Sie die Antennenbuchse auch mit einer Dachan-

tenne oder einem Breitbandkabelanschluss verbinden. Durch Drücken

der „MODE“-Taste wählen Sie die Stellung „Radio“. Im Display wird

daraufhin die eingestellte Frequenz angezeigt. Der manuelle Wechsel

des Senders erfolgt mit den „TUNING“-Tasten auf der Fernbedie-

nung. Der automatische Suchlauf wird durch längeres Drücken (mehr

als 1 Sekunde) der „TUNING“-Tasten aktiviert.

Die DSS 303 hat 20 „PRESETS“ (Senderspeicherplätze). Um einen

Sender zu programmieren müssen Sie zuerst die gewünschte

Radiofrequenz einstellen. Mit der „MEMO“-Taste wird der Vorgang

gestartet, die Anzeige für den Speicherplatz beginnt zu blinken. Mit

„PRESET UP“ bzw. „PRESET DOWN“ wird der gewünschte

Programmplatz ausgewählt und mit „ENTER“ bestätigt. Die Wieder-

gabe der gespeicherten Radiofrequenzen erfolgt über die „PRESET“-

Tasten.

Die Umschaltung Stereo / Mono erfolgt ausschließlich manuell über

die Fernbedienung. Diese Einstellung wird bei der Senderprogram-

mierung mitgespeichert.

Listening to radio

Connect the dipole antenna (included in delivery) to the antenna

connection on the reverse of the DSS 303. Alternatively the antenna

socket may also be connected to a roof aerial or a broadband cable

connection. The „Radio“ setting can be selected by pressing the

„MODE“ button and the selected frequency will appear on the display

accordingly. To change stations, use the „TUNING“ buttons on the

remote control. The search sequence is activated by sustained pressing

(longer than 1 second) of the „TUNING“ button.

The DSS 303 has 20 „PRESETS“ (programmable stations). In order to

programme a station you must first set the desired radio frequency.

Use the „MEMO“ button to start this process, the display for the

preset will start to flash. Use the „PRESET UP“ and „PRESET DOWN“

buttons to select the desired preset area and then confirm by pressing

„ENTER“. The „PRESET“ buttons are used for playing back the stored

radio frequencies.

Switching between Stereo / Mono is done manually using the remote

control. This setting is also retained during station programming.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canton DSS 303 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canton DSS 303 Manual

Product: