562752
32
Zoom out
Zoom in
Previous page
1/47
Next page
32
Connection
Please ensure that all electrical components are switched off before connecting. Your Digital Movie System has three optional inputs. In principle
it is enough to connect one of these inputs to your TV and all further devices to your TV. To achieve the best possible sound we recommend that
you connect your satellite receiver, Blu-Ray or DVD player directly to the DM System. The following options are possible, depending on the type
and fittings of the source used:
TV – Digital input (optical)
Modern TV devices have an optical audio output (Toslink). Connect this with the
input marked “TV” on the DM System. This connection guarantees optimal signal
transmission and best sound quality.
DVD – Digital input (coaxial)
To transmit the sound signal connect the digital coaxial output of your Blu-Ray or
DVD player with the jack marked “DVD” on the DM System. To transmit the pic-
ture signal your player must also be connected to the TV. The input marked “DVD
on the DM System can be selected if your TV does not have an optical output.
AUX – Analogue input
If your TV only has an audio output marked “Pre-Out” then connect it using the
shielded stereo RCA cable plugged into the analogue input on the DM
System marked “AUX”. Otherwise this input can be used to connect video
recorders or game consoles.
SUB – WIRELESS
In wireless operation the Soundbar and the subwoofer are connected via a high-
end transmission path. A frequency of 5.8 GHz guarantees robust, loss-free data
transmission. Once the Soundbar has been switched on the subwoofer is activated
and the radio connection made automatically. The input selector switch of the
subwoofer needs to be set to “wireless” (factory setting). When the Soundbar is
switched off, the LED on the subwoofer starts to flash red and after about a minute
the subwoofer also switches off.
SUB OUT – WIRED
You can use this output to connect the
wireless subwoofer of the DM System
via a cable. The input selector switch on
the subwoofer needs to be set to “wired,
Power on” if you want the subwoofer to
stay permanently switched on or “wired,
Power auto” if it should switch itself on
or off with or just after the Soundbar. The
SUB OUT output is not active in the factory
setting and needs to be activated using the
remote control. See Page 36 “Extended
funct ions”.
English
SUB IN
WIRED
DIGITAL MOVIE
DVD
DVDTV
TV
AUX
AUX
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canton DM900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canton DM900 in the language / languages: English, German as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info